This page lists the main capabilities of NNx, grouped by task. Each entry names its entry points and links to the guide or example that shows it. It describes the current source; an older PyPI release can lack some entries (see Release or source). For installation and a first trained model, see the README and the Quickstart. Extras named here are installed as pip install "thekaveh-nnx[<extra>]".

• Supervised loop. NNModel builds the network from frozen configuration objects and runs train(), evaluate() and predict(). Callbacks, early stopping, gradient clipping, gradient accumulation and seeded reproducibility are built in.
• Schedulers. The Schedulers enum provides REDUCE_LR_ON_PLATEAU, STEP, COSINE_ANNEALING, ONE_CYCLE and LINEAR_WARMUP_DECAY. A scheduler steps once per epoch by default, or once per committed optimizer update with NNSchedulerParams(clock="optimizer_update").
• Precision. PrecisionPolicy selects FP32, FP16 or BF16 explicitly.
• Metrics and monitors. NNTrainParams.extra_metrics accepts any callable(y_true, y_pred) -> float. Declared metrics (MetricSpec) and one named monitor (MonitorSpec) drive BEST selection, plateau scheduling and an EarlyStopping given the same monitor.
• Objectives. LossTerms with explicit denominators run over one shared update engine, which gives accumulation, clipping and the precision policy to NNModel and Trainer alike. Built-in objectives: supervised_objective, kd_objective, diffusion_objective and jepa_objective.
• Custom steps. The train_step_fn hook replaces the per-batch supervised step with your own function. Use it for autoencoders, VAEs, recommendation or other methods without changing NNx internals.
• Multi-optimizer Trainer. nnx.trainer.Trainer parallels NNModel.train() for disjoint optimizers, such as GAN generator and discriminator or actor-critic. Each entry of its name-keyed optimizer dictionary is scoped by an NNParamGroupSpec; the groups must partition the parameters.
• Optimizers. Optims provides SGD, Nesterov SGD, Adam, AMSGrad and AdamW. Any other torch.optim.Optimizer is a registered factory (nnx.register_optimizer_factory with NNOptimFactoryParams). run.yaml stores only the factory's id, version and config, so runs reload offline. See Concepts §3.1.
• Callbacks. The Callback base class has on_{train,epoch}_{begin,end} hooks. Built in: EarlyStopping, LRMonitor, ModelCheckpoint (custom epoch tags), TensorBoardCallback (tensorboard extra) and WandbCallback (wandb extra). A legacy Callable[[List[IDP]], None] is still accepted.
• Data-parallel training. model.train(params, distributed=nnx.distributed.DDP()) runs one process per device under torchrun on one machine. NNx partitions the data and keeps every update equal to the union batch's, and one rank writes the run. See Quickstart §3.10.
• Opt-in compilation. model.train(params, compile=CompileSpec()) compiles the built-in step's FP32 forward pass; checkpoints, export and later inference stay eager. It records requested and effective state and never guarantees a speedup. nnx.benchmarking separates first-call compile cost from warmed latency. It is not available with DDP or quantization. See Concepts §28.

• Content-addressed runs. NNRun saves run.yaml, idps.csv and metadata.yaml under runs/<id>/, where id is the MD5 of the configuration's state().
• Checkpoints. NNCheckpoint saves the FIRST, Q1, Q2, Q3, LAST and BEST tags. LAST is the epoch commit marker: a failed LAST write rolls the history back, and NNRun.load() drops history newer than LAST after an interrupted process.
• Warm resume. Each checkpoint names a generation-addressed training-state sidecar. A resume restores the optimizer, scheduler, scaler, loader generators and every RNG stream; a torn or corrupted resume point is refused before anything is restored. See Concepts §14.
• Bounded history. history=nnx.history.HistoryJournal(retention, chunk_size) keeps a bounded window in memory and appends each record once to runs/<id>/history/, with lazy tail reads and CSV export.
• Experiment plans. An immutable ExperimentPlan branches a configuration (with_epochs, with_seed, with_data, ...). validate() reports every problem without reading data. probe(batch) runs an eval-mode no-grad forward pass, plus a train-mode loss pass when the batch has a target. It then restores the ambient state. fit() trains a distinct attempt. See examples/experiment_plan.py.
• Budgeted search (optuna extra). nnx.search.search(plan, space, ...) runs a sequential Optuna study over an experiment plan; each trial fits a new plan in its own run directory. See Concepts §29.
• Provenance. train(..., provenance=ExperimentManifest(...)) records the declared task, labels, model, data and split identities with a SHA-256 fingerprint and one attempt record per fit. nnx.provenance.compare diffs two plans without loading models.
• Run bundles and the Hub. nnx.bundles exports a checkpoint as a verified, portable bundle. With the hub extra, NNModel supports save_pretrained, push_to_hub and from_pretrained, and checkpoints can be saved as safetensors. See HuggingFace Hub.

• Task adapters. NNModelParams(task=TaskSpec.regression(n)), .multilabel(n, threshold=...) or .categorical(n, ignore_index=...) validates batches before any update and masks NaN or ignored targets out of the loss and metrics. The loss is averaged over valid targets. See examples/regression_task.py.
• Ranking. nnx.ranking.RankingTask trains a scorer with a pairwise logistic objective within each query. It reports MRR@k, Recall@k and NDCG@k per complete query. See examples/ranking_offline.py.
• Graph classification. nnx.graph_tasks classifies whole graphs from a GraphCollection with stable graph ids and mean or sum pooling. See examples/graph_classification_offline.py (graph extra).
• Link prediction. nnx.link_tasks splits edges into a replayable manifest, passes messages over training edges only and reports exact AUROC and AP. A held-out positive edge in a message graph is refused before any update. See examples/link_prediction_offline.py (graph extra).
• Your own modules. NNModel trains any torch.nn.Module. Register a factory (register_model_factory, ModelSpec) for a model that rebuilds from checkpoints, safetensors and the Hub, or pass an instance with NNModel(module=m, ...) for runtime-only use. See examples/custom_module.py.

• Diffusion (DDPM). nnx.diffusion provides LINEAR and COSINE noise schedules and a conditional MLP denoiser (DiffusionMLP). Train with a step factory or diffusion_objective, and sample with sample.
• Distillation. kd_train_step_factory mixes Hinton-style soft and hard losses with a frozen teacher. feature_kd_train_step_factory adds an MSE term between named intermediate activations. born_again_train iterates self-distillation over generations.
• Offline teacher distributions. nnx.paradigms.offline_distillation distills from stored teacher probabilities, aligned by sample and candidate id, without a live teacher.
• Contrastive and augmentation. SimCLR (NT-Xent), Mixup and CutMix step factories.
• Mixture of Experts. Sparse top-k routing with a Switch-style load-balancing loss, and a drop-in nnx.MoELinear.
• I-JEPA. Masked-patch latent prediction against an EMA target encoder, with JEPAPredictor, build_target_encoder, update_ema, random_block_mask and a small ViTNN encoder. See I-JEPA.
• DPO. Preference-pair fine-tuning against a frozen reference policy. See DPO.

Paradigm and diffusion step factories share a NaN guard and gradient clipping.

• Transfer learning. nnx.finetune freezes layers by glob pattern, loads external state dicts with optional key remapping and sets per-group learning rates through NNOptimParams.param_groups.
• Parameter-efficient fine-tuning. nnx.peft provides LoRA, DoRA, IA3, prefix tuning, prompt tuning and adapter layers. Each save_*_weights function saves only the trainable delta (DoRA's magnitude needs the full state_dict()). LoRA starts from the pretrained behavior because its second factor is zero-initialized.
• Quantization (quantize extra). nnx.quantize.quantize_int8(model) applies torchao INT8 weight-only post-training quantization without calibration data and returns the same model class. QAT 8da4w uses qat_train_step_factory with QATLifecycleCallback.
• Pruning. nnx.prune.magnitude_prune applies unstructured masks, baked into checkpoint-safe weights by default; semi_structured_24 applies 2:4 sparsity through torchao.
• Model surgery. nnx.surgery provides widen and deepen (function-preserving Net2Net edits on validated topologies), drop_layer, low_rank_factorize (SVD) and expand_embedding. See Model surgery.
• Recorded recipes. nnx.transforms.TransformRecipe records LoRA and SVD low-rank transforms in every checkpoint and Hub save, so from_checkpoint and from_pretrained rebuild the transformed topology.

• Networks. FeedFwdNN, FeedFwdMoENN, ConvNN, GraphConvNN, GraphSageNN, GraphAttNN, TransformerNN and ViTNN (Nets.VIT with NNViTParams). The graph networks need the graph extra.
• Causal language-model task. nnx.lm_tasks.CausalLMTask provides the next-token objective and evaluation for a TransformerNN, reporting token NLL, perplexity and accuracy. See Quickstart §3.6.
• Language modeling. TransformerNN is a decoder-only model with RMSNorm, RoPE, SwiGLU, tied embeddings and a KV cache. GenerativeNNModel.generate() supports greedy, top-k, top-p and repetition-penalty sampling. The lm extra adds the BPE tokenizer. See Language modeling.
• KV-cache scope. A CPU regression test requires cached decoding to be at least 1.2× faster than full recomputation for its fixed 256-token workload. Results on other hardware and workloads vary. Past max_seq_len, the cache rebuilds every step.
• Decoding order. LogitsChain.builder() sorts logit processors into the canonical order. OrderedLogitsPipeline runs stages exactly as declared, through generate(logits_pipeline=...).
• ONNX export. NNModel.to_onnx(path, example_input) uses the legacy torch.onnx.export, which needs the onnx extra. dynamo=True uses the torch.export-based exporter, which also needs onnxscript (onnx-dynamo extra). nnx.export_conformance checks numerical parity in ONNX Runtime (onnx-runtime extra). See Export conformance.
• Experimental GGUF (gguf-write extra). nnx.interop.write_gguf writes an NNx-tagged GGUF file. Stock llama.cpp, Ollama and LM Studio do not implement its architecture. See Experimental GGUF export.
• Embeddings (embeddings extra). nnx.embeddings trains a text embedder from (anchor, positive) pairs and exports a FAISS index for downstream retrieval. See Embeddings.

• Datasets. NNDataset (torchvision, vision extra), NNGraphDataset (PyTorch Geometric, graph extra), NNTabularDataset (pandas) and NNPreferenceDataset (DPO preference triples).
• Reproducible splits. nnx.data_splits.plan_split plans group, chronological and stratified splits into a JSON SplitManifest, which NNTabularDataset replays by sample id. See examples/split_replay.py.
• Train-only preprocessing. nnx.preprocessing.Standardizer fits on the training rows only and reloads from JSON. See examples/preprocessing_offline.py.
• Probabilities. NNModel.predict_proba(X, ProbabilitySpec(...)) returns probabilities for an explicitly declared task; predict() is unchanged.
• Streaming prediction and metrics. NNModel.iter_predict(loader) yields predictions batch by batch with bounded memory, and nnx.streaming provides mergeable metrics. See Concepts §21.
• Calibration. nnx.calibration.fit_temperature fits one temperature on a named calibration split and reports NLL, Brier and reliability before and after. See examples/calibration_offline.py.
• Abstention. nnx.abstention accepts a prediction only above a probability or margin threshold; select_threshold tunes it against a risk ceiling. See examples/abstention_offline.py.
• Multi-seed comparisons. nnx.comparison summarizes repeated runs without pooling incompatible observations and pairs two configurations by replicate key. See examples/compare_seeds.py.
• Typed decisions. nnx.decisions asks Choice, Boolean or Score questions and returns validated, labelled probabilities. Providers serve a trained classifier, a local NLI model or hosted Jev models (jev extra). See Typed decisions.

• Configuration objects. NNParams, NNModelParams, NNTrainParams, NNOptimParams, NNSchedulerParams and NNTrainerParams are frozen dataclasses that round-trip through state() and from_state(). A field at its default is left out of state(), so adding a field does not change existing run ids.
• Builders. NNOptimParams.builder(), NNSchedulerParams.builder(), NNTransformerParams.builder() and NNTrainerParams.builder() expose one method per valid variant, such as .adam(...) or .one_cycle(...), so an invalid combination cannot be built. .copy() branches a Builder and Builder.from_params(params) rebuilds an existing value. See examples/builder_branching.py.
• Enum factories. Nets, Losses, Optims, Schedulers, Activations, Devices and NoiseSchedulers construct their objects when called. Checkpoints names the checkpoint tags.
• Reproducibility. nnx.set_seed(seed) seeds every RNG and cuDNN; nnx.dataloader_worker_init_fn seeds loader workers.
• Learning-rate finder (plots extra). nnx.lr_finder runs an exponential sweep, suggests a one-cycle max_lr and restores the model and RNG state afterwards.
• Run plots (plots extra). VisUtils returns Plotly figures (confusion matrix, line and scatter plots, t-SNE of checkpoint logits) and a classification-report DataFrame.
• Model internals (viz extra). nnx.viz provides summary, weight_histogram, activation_map, attribute (Captum), gradient_flow and netron_export, which also needs the onnx extra.
• Errors as values. nnx.result provides opt-in Ok and Err values for code that prefers to branch on a value; every NNx API still raises. See Concepts §27.
• Typing. NNx ships a PEP 561 py.typed marker, so pyright and mypy use its annotations.