[Faceplate] Breadboard Design - teamias/SolarProject GitHub Wiki

Breadboard Design

Materials Touch Screen https://learn.adafruit.com/adafruit-2-8-tft-touch-shield-v2/downloads Breadboard https://www.amazon.com/Circuit-Test-MB-106-Breadboard-175x230mm-Holes/dp/B008MOLEGK/ref=sr_1_13?ie=UTF8&qid=1499835736&sr=8-13&keywords=breadboard Switches: https://www.amazon.com/CO-RODE-Tact-Button-Switch-6x6x5mm/dp/B00W0YUV1W/ref=sr_1_2?ie=UTF8&qid=1499835817&sr=8-2&keywords=button+electronic LED (x12): https://www.amazon.com/Assorted-Clear-Emitting-Diodes-Colors/dp/B00UWBJM0Q/ref=sr_1_2?ie=UTF8&qid=1499835845&sr=8-2&keywords=leds Arduino Mega 2560 https://store.arduino.cc/usa/arduino-mega-2560-rev3 DHT Sensors (x8) https://www.adafruit.com/product/385 PIR Motion sensor (x2) https://www.adafruit.com/product/189

Faceplate *Need the faceplate dimension to determine the spacing between parts

Big rectangle: screen (2.28in x 1.9in) Small squares (x4): buttons (6mm x 6mm) Circles (x12): LEDs (0.2in x 0.2in)

Breadboard connections

Breadboard connection (vertical breadboard setup) ****

Breadboard connection (phase,dht switched)

Fixed an error: wires connected to pin 36, 37, 38, 39 is moved to 37, 38, 39, 40 respectively.

Moved the stop switch down and removed the extra breadboard