TinyG Hardware Information - synthetos/TinyG GitHub Wiki
Board Dimensions and Holes
Board Dimensions for TinyG Version 8
- Board dimensions (X,Y) 4.00"(101.6mm), 4.15"(105.41mm)
- Holes are 4-40 - 0.120"(3.05mm) bore, 0.250"(6.35mm) clearance
- Hole locations (X,Y)
- 0.15", 0.15" (3.8mm, 3.8mm)
- 3.85", 0.15" (97.8mm, 3.8mm)
- 0.15", 4.00" (3.8mm, 101.6mm)
- 3.85", 4.00" (97.8mm, 101.6mm)
- Motor connector centers
- Motor1 3.618", 3.315"
- Motor2 3.618", 2.453"
- Motor3 3.618", 1.604"
- Motor4 3.618", 0.734"
- USB connector center 0.57", 0"
- J6 spindle/coolant connector center 0.242", 3.272"
- J7 XY limit switch connector center 0.242", 2.319"
- J8 ZA limit switch connector center 0.242", 1.418"
Board Dimensions for TinyG Version 7 and earlier
- Board dimensions (X,Y) 3.75", 4.15"
- Holes are 4-40 - 0.120" bore, 0.250" clearance
- Hole locations (X,Y)
- 0.15", 0.15"
- 3.60", 0.15"
- 0.15", 4.00"
- 3.60", 4.00"
- Motor connector centers
- Motor1 3.468", 3.315"
- Motor2 3.468", 2.453"
- Motor3 3.468", 1.604"
- Motor4 3.468", 0.734"
- USB connector center 0.781", 4"
- J11 spindle/coolant connector center 0.25", 1.08"
- J12 reset takeoff connector center 0.25", 0.687"
- J13 limit switch connector center 0.99", 0.14"
Motor Plugs for v7 and Earlier
This is the mating (wire) connector for the quick release motor plugs on the v7 and earlier: