3D Printing Hotend - superjamie/lazyweb GitHub Wiki
E3D Genuine Stuff
- https://wiki.e3d-online.com/wiki/Main_Page
- https://wiki.e3d-online.com/wiki/E3D-v6_Assembly
- https://wiki.e3d-online.com/wiki/E3D-v6_Documentation
- https://wiki.e3d-online.com/wiki/E3D-v6_(Volcano)_Documentation
- https://wiki.e3d-online.com/wiki/E3D-v6_Troubleshooting
- https://wiki.e3d-online.com/wiki/Titan_Assembly
Making an E3D Clone
I've managed to assemble a reasonable facsimile of an E3D V6 with the following:
The rest is easy to find anywhere:
- Heater Block
- Heater Cartridge
- M3 Threaded Thermistor or Glass Thermistor
- Nozzle
- 30mm 12V Fan
Silicone Socks
- https://www.reddit.com/r/3Dprinting/comments/4gh2na/i_made_an_e3d_insulator_to_improve_print_cooling/
- https://e3d-online.com/blog/2016/08/13/silicone-socks/
- http://e3d-online.com/E3D-v6/Full-Kit/V6-Block-Sock-Kit
- https://www.thingiverse.com/search/?q=e3d+mold
- E3D V6 Silicone Cover (Mold) / Cartridge Thermistor Version by Martin_S
- E3D V6 Silicone Cover (Mold) / Old Blocks Version by Martin_S
- e3d v6 silicone sleeves/socks mould by megablue
- Heater Block Silicone Rubber Sock Mold by boksbox
- https://www.youmagine.com/designs/e3d-volcano-silicone-casting-mold
You can get two-part RTV, but the red Permatex seems to give good results. The blue and grey stuff doesn't set according to one result. This is car exhaust gasket silicone, get it at the auto parts store.