3D Printing Bed Adhesion - superjamie/lazyweb GitHub Wiki
Here's my experience with different bed adhesion methods.
Legend
Yes! Perfect adhesion for tricky prints (may have to use brim or adhesion pads)
Sorta. Alright for smaller parts, anything tricky warps.
No. Poor adhesion, absolute failure.
To Do. Haven't tried yet.
Results
| PLA | PETG | |
|---|---|---|
| 3M ScotchBlue Painter's Tape | |
|
| BuildTak | |
|
| PEI (glossy) | |
|
| PEI (wet-sanded 60 grit) | |
|
| Polycarbonate (wet-sanded 60 grit) | |
|
| UHU Glue Stick | |
|
| Officeworks Glue Stick | |
|
| Elmer's Clear Glue | |
|
| PET Tape | |
|
| "FakeTak" $4 China BuildTak | |
|
| Bare Clean Glass | |
N/A |
Future
Some surfaces I want to try, but am too cheap to buy
- PrintBite+
- PrintInZ Skin