Quick Start

• Connect a receiver to Pin #2 of your Arduino.
• Upload the ReceiveDemo sketch which is provided in the libary.
• Open the Serial Monitor (9600 baud)
• Press any key on your remote

Wiring

(You can also use any other external interrupt pin of your Arduino instead of interrupt #0/Pin #2)

How it works

With the enableReceive method the Arduino will listen to incoming signals on the external interrupt (first parameter). Note that most boards have only two external interrupts: number 0 (on digital pin 2) and 1 (on digital pin 3) (The Arduino Mega has some more).

(... deprecated stuff removed here ...)

Please take a look at the ReceiveDemo examples which are delivered with the library.

Note: receiving is disabled when compiling for ATtiny85/45/25/84/44/24.