Yokogawa CV7000 file names - stoeter/Fiji-Tools-for-HCS GitHub Wiki
Image Name = <Plate ID>_<Well>_<T>_<F>_<L>_<A>_<Z>_<C>.tif
* <Plate ID> = Assay Plate Name Used For the Measurement * <Well> = Well Position * <T> = Time Point Number (See Figure Below) * <F> = Field # (Fields are assigned a number. The field closest to the top left is assigned number 1 and the field closest to the bottom right is the highest numbered field.) * <L> = Time Line Number (See Figure Below) * <A> = Action Number (Each action in an Action List created by the user during measurement setup is assigned a number. The Action at the top of the Action list is assigned number 1) * <Z> = Z stack Number (The bottom Z stack is assigned number 1) * <C> = Channel Number ( The Channel Number was assigned by the user during measurement setup. The Channel Number has an Emission Wavelength, Objective Magnification, Exposure Time, Binning Value, and Mode (confocal, epi, phase, bright field) associated with it)
007EX170512A-MDCKgekoCa_B02_T0006F001L03A03Z01C01.tif
- 007EX170512A-MDCKgekoCa - plate name (must not contain underscores)
- _ - underscore
- B02 - well B2
- _ - underscore
- T0006 - sixth time point
- F002 - second field
- L03 - third time line
- A03 - third acquisition
- Z01 - first z-plane
- C01 - channel 01
- .tif - file extention
taken from "Yokogawa Image File Information.pdf" documentation for CV7000
Wako Automation USA, Inc., 11575 Sorrento Valley Rd, Suite 207, San Diego, CA 92121 www.wakoautomation.com