Lab 4‐2: Simple Routing Lab - sthompson2752/Network-Fundamentals GitHub Wiki

This lab involved setting up a simple network in Packet Tracer.

Useful Instructions The simulation panel allows you to see how the packets move in a ping.

How do you set the gateway address on a workstation in Packet Tracer? To set the gateway address on a workstation in Packet Tracer, click on the workstation and go to the config tab. From there, type in the desired gateway address to the right of 'Default Gateway'.

How do you set the IP and subnet mask on different interfaces of a multilayer switch? To set the IP and subnet mask on different interfaces of a multilayer switch, first click on the multilayer switch. Next, click on the desired interface (ex. FastEthernet0/1). Put in the IPv4 Address and Subnet Mask next to where it is indicated.

How do you enter simulation mode in Packet Tracer? To enter simulation mode in Packet Tracer, click on Simulation in the bottom right corner or use Shift + S on the keyboard.

How do you set which types of packets you want to see in Simulation Mode? To set which types of packets you want to see in Simulation Mode, click on Event List in the bottom right corner then click on Edit Filters to choose.