Kura

• Accessing Kura
  • Accessing the gateway Kura web interface
• Execute commands on the gateway via Kura

Accessing Kura

Accessing the gateway Kura web interface

After starting the gateway, you have to wait 4 min before being able to connect to Kura.

Default network configuration :

• Ethernet (eth0) => DHCP client. WAN interface
• WiFi (wlan0) => Access point and DHCP server. LAN interface. IP 172.16.1.1
• SSID = Gateway serial number
• Password: "testKEYS"
• To access Kura you need a computer that is on a network that can reach the gateway directly (no NAT) then type in your browser:
• Kura4 (until Solidsense 1.1a): http://\/kura
• Kura5 (Solidsense 1.2 or higher): https://\
• Default credential to access Kura: admin/admin

Execute commands on the gateway via Kura

Device / Command / Execute, no password needed