WebSerial - softwarecrash/Solar2MQTT GitHub Wiki
WebSerial
WebSerial is used to publish command directly to the device. In addition, WebSerial issues a message each time Solar2MQTT has received data from the inverter and has published it on the MQTT broker: „Data sent to MQTT Server… Done“.
Warning: Commands are not checked by Solar2MQTT. Incorrect commands can damage the inverter and whatsoever. Command lists can be found here: https://github.com/softwarecrash/Solar2MQTT/tree/master/Protocol
Call WebSerial
Function
The following two commands can be tried if your inverter uses the P18 protocol:
Command | Function |
---|---|
^P005PI | Query protocol ID |
^P004T | Query current time |
The response to the commands is not shown in WebSerial. It can be viewed within the MQTT Explorer. The description for this can be found in the Solar2MQTT-Wiki in the chapter "Set Parameters".
Written by ESP64