Reported Working Devices - softwarecrash/Solar2MQTT GitHub Wiki
This page is generated automatically from public device reports submitted through the Solar2MQTT report form.
Reported Working Devices
| Manufacturer | Model | Transport | Protocol | Protocol ID | Detected Model | Firmware | Build Variant | Notes | Reports |
|---|---|---|---|---|---|---|---|---|---|
| 1 | ECO | RS232 | NOD | NOD | - | - | wemos_d1_mini32 | - | 1 |
| ANENJI | 6.2KWT | RS232 | MODBUS_SMG | MODBUS_SMG | - | - | wemos_d1_mini32 | Thanks, friend! Thanks to you, I finally managed to connect Anennji 6.2kWt with Home assistant! | 1 |
| ANENJI | ANJ-4200W-24V-W-AE | RS232 | MODBUS_SMG | MODBUS_SMG | SMG 99432512106945 | - | esp32s3_supermini | This is an intermediate version of the inverter with the full model number on the box: ps399-anj-4200w-24v-w-ae. Its key feature is upgraded solar panel array specifications: PV Array Power: 6200W, PV Voltage: 500V, PV Current: 27A, Max Charge Current: 120A. | 1 |
| ANENJI | ANJ-HHS-11000W-48V-WIFI | RS485 | MODBUS_SMG_II_11KW | MODBUS_SMG_II_11KW | SMG-II 11KW 92B32601101629 | - | esp32c3_supermini | But Grid Power (kw/h) not included. | 1 |
| ANERN | AN-EX-PRO10200 | RS232 | PI30_MAX | PI30 | VMII-NXPW5KW | - | esp32c3_supermini | The Solar wattage is detected a 0200 instead of 10200, Need to spoof data to set to 10200 to display correct solar percentage. | 1 |
| ANERN | AN-SCI-ECO-3200 | RS232 | PI30 | PI30 | VMII-NXPW5KW | - | esp32c3_superminiwemos_d1_mini32 | Actually it is ESP32 30 pin CH340 | 2 |
| ANERN | AN-SCI-EVO-2000 | RS232 | PI30 | PI30 | VMII-NXPW5KW | - | esp32c3_supermini | The firmware may need some work, as sometimes it fails to get the required Live Data from the inverter. I don't remember having this problem with the ESP 8266 config, but I prefer this one because it works reliably with mqtt brokers that require TLS/SSL (which most of them do). | 1 |
| ANERN | AN-SCI-EVO-4200 | RS232 | PI30_MAX | PI30 | VMII-NXPW5KW | - | esp32c3_supermini | - | 1 |
| ANERN | SCI-EVO-6200 | RS232 | PI30 | PI30 | VMII-NXPW5KW | - | wemos_d1_mini32 | - | 1 |
| ANERN | SCI-EVO-6200 | RS232 | PI30_MAX | PI30 | VMII-NXPW5KW | - | wemos_d1_mini32 | - | 2 |
| ANERN | SCI-EVO4200 | RS232 | PI30_MAX | PI30 | VMII-NXPW5KW | - | wemos_d1_mini32 | - | 1 |
| ANINEREL | ANL-4200T-24L-W | RS232 | MODBUS_SMG | MODBUS_SMG | SMG 99432608105291 | - | wemos_d1_mini32 | - | 1 |
| EASUN | EASUN SMS-6.5KP | RS232 | MODBUS_DEYE | MODBUS_DEYE | 02020475 | - | esp32c3_supermini | Unfortunately, the detected protocol isn't working properly. It's showing incorrect readings. Can I manually change the protocol to check if it's working?Unfortunately, the detected protocol isn't working properly. It's showing incorrect readings. Can I manually change the protocol to check if it's working? email [email protected] | 2 |
| EASUN | IGRID SV IV 5.6 KW | RS232 | PI18 | 18 | - | - | wemos_d1_mini32 | Works fantastic, 88 entities, perfect real time data, flowless integration in HA through mttq. Huge thanks! | 1 |
| EASUN | SMH-II-2.2 | RS232 | PI30 | PI30 | - | - | esp32s3_supermini | - | 1 |
| EASUN | SMW8000 | RS232 | PI30_MAX | PI30 | MKS2-8000 | - | esp32c3_supermini | Pv2-input Power nieje vždy aktuálny ,zamrza | 2 |
| ECGSOLAX | VICTOR MAX-10.2 KW-M | RS232 | PI30_MAX | PI30 | VMII-NXPW5KW | - | wemos_d1_mini32 | Using ESP32. Pin assignment: UART Rx: GPIO19 UART Tx: GPIO23 You can get power from the RS232/Wifi port (RJ45) using a 5V stepdown: RJ45 Pin 8: Ground RJ45 Pin 4: VCC (Check voltage first before connecting.) | 1 |
| ECOWORTHY | ECO5000W(SR) | RS485 | MODBUS_ANENJI_SRNE | MODBUS_ANENJI_SRNE | Anenji SRNE SR-2602280561-100180 | - | esp32_wroom_32 | I don't see any configuration parameters on you app for ESP32 | 1 |
| EDECOA | EM-402A | RS232 | PI30 | PI30 | - | - | esp32c3_supermini | Hello from Odessa, Ukraine | 1 |
| GOOTU | 8.2KW HYBRID INVERTER DUAL MPPT/DUAL OUTPUT AC | RS232 | PI30_MAX | PI30 | VMII-NXPW5KW | - | esp32s3_supermini | - | 1 |
| INVERTOR | INFINISOLAR V 4 TWIN 6KW HYBRID | RS232 | PI18 | PI18 | - | - | wemos_d1_mini32 | Super work ok | 1 |
| JESUDOM CHINA | AXPERT VM IV 4,2KW | RS232 | PI30_PIP_GK | PI30 | VMIII-4000 | - | wemos_d1_mini32 | - | 1 |
| POWERMR | POW-HVM3.2H-24V-N | RS232 | PI30 | PI30 | VMII-NXPW5KW | - | esp32c3_supermini | In general, everything works. | 1 |
| POWMR | 10 | TTL | NOD | NOD | - | - | esp32c3_supermini | - | 1 |
| POWMR | 6.2 | RS232 | PI30_MAX | PI30 | VMII-NXPW5KW | - | esp32c3_supermini | - | 1 |
| POWMR | MPS-V PLUS 3.5KW | RS232 | PI30 | PI30 | VMII-NXPW5KW | - | sp32_s3_wroom_cam | Using an ESP32-S3-N16R8 WROOM CAM with an RS232-to-TTL module. I selected this module because it has an integrated microSD card slot, which I will use for data logging purposes. | 1 |
| POWMR | POW-HVM10.2M | RS232 | PI30_MAX | PI30 | VMII-NXPW5KW | - | wemos_d1_mini32 | Keeps on disconnecting from WIFI. Only recognizes 1 string of PV.Гібридний інвертор PowMr 10.2 кВт (POW-HVM10.2M), підключення через MAX3232 (RS232), стабільна робота підтверджена. PowMr POW-HVM10.2M 10.2kW hybrid inverter, connected via MAX3232 (RS232), confirmed stable operation. | 2 |
| POWMR | POW-HVM4.2K-24V-D | TTL | NOD | NOD | - | - | wemos_d1_mini32 | - | 1 |
| POWMR | POW-HVM4.2K-24V-N | RS232 | PI30 | PI30 | VMII-NXPW5KW | - | wemos_d1_mini32 | Working with MAX3232 | 1 |
| POWMR | POW-HVM6.2K-PRO | RS232 | PI30_PIP_GK | PI30 | - | - | wemos_d1_mini32 | ESP8266 and ESP32 works out of the box | 1 |
| POWMR | POW-HVM6.2M-48V-N | RS232 | NOD | NOD | - | - | wemos_d1_mini32 | Working with MAX3232 and ESP32 Wemos D1 Mini32 | 1 |
| POWMR | POW-HVM6.2M-48V-N | RS232 | PI30 | PI30 | VMII-NXPW5KW | 1.2.0 | ESP8266_d1_mini | Worked out of the box. Controller was ESP8266 Wemos D1 Mini -- the one recommended on the wiki. I've used standard esptool (installed via brew on macos) | 1 |
| POWMR | POW-HVM6.5K-E | RS232 | MODBUS_POWMR | MODBUS_POWMR | PowMr HVM Modbus 4501 | - | esp32s3_supermini | - | 1 |
| POWMR | POWHVM62M48VN | RS232 | PI30 | PI30 | VMII-NXPW5KW | - | wemos_d1_mini32 | - | 1 |
| POWMR | POWMR HVM-6.2M-48V-N | RS232 | PI30_MAX | PI30 | VMII-NXPW5KW | - | wemos_d1_mini32 | Build variant is wenmo d1 but tge actual module is esp32 devkit V1 | 1 |
| SILA | SILA PRO 5600MH | RS232 | PI18 | PI18 | - | - | waveshare_esp32_s3_eth | - | 1 |
| SUMRY | SP 7000 | RS232 | PI30 | PI30 | - | - | wemos_d1_mini32 | Battery mode must be not lib | 1 |
| SUMRY | SP-3200 | RS232 | PI30 | 230_0_13_9_230_0_50_0_13_9_3200_3000_24_0_23_0_2 | - | - | esp32c3_supermini | - | 1 |
| SUMRY | SP7000 | RS232 | PI30 | PI30 | - | - | esp32c3_supermini | - | 1 |
| SUOER | VMS-V-12K-48-HG | RS485 | PI30_MAX | PI30 | - | - | sp32_s3_wroom_cam | Using an ESP32-S3-N16R8 WROOM CAM with an RS485-to-TTL module. I selected this module because it has an integrated microSD card slot, which I will use for local data logging purposes. | 1 |
| TAFFWARE | VICTOR NM-ECO-6,2KW PLUS | RS232 | PI30_MAX | PI30 | VMII-NXPW5KW | - | wemos_d1_mini32 | YUSUF from Indonesia | 1 |
| WERCHTAY | GD3024EMH | RS232 | PI30 | PI30 | VMII-3000 | - | wemos_d1_mini32 | PIN-Layout RJ45 am Inverter: Pin 2: 12V VCC Pin 3: Inverter TX Pin 5: GND Pin 6: Inverter RX | 1 |
| YINGFA | YF6,2K | RS232 | NOD | NOD | - | - | wemos_d1_mini32 | - | 1 |
| YINGFA | YF6.2K | RS232 | PI30_MAX | PI30 | - | - | wemos_d1_mini32 | Device Model: VMII-NXPW5KW | 1 |
Notes
- Entries are grouped automatically by manufacturer, user model, transport and detected protocol.
- Firmware and build values are merged when multiple reports describe the same device family.
- Notes from matching reports are merged into the same row.