Editable values over MQTT and Json - softwarecrash/Daly2MQTT GitHub Wiki

for manipulating the BMS use the following DataPoints

MQTT Topic	Description	Value
`<topic>/Device_Control/Pack_SOC`	you can set the SOC for calibration	`0.0-100.0`
`<topic>/Device_Control/Pack_DischargeFET`	switch the Discharge FET	`true` `false`
`<topic>/Device_Control/Pack_ChargeFET`	switch the Charge FET	`true` `false`
`<topic>/Device_Control/Wake_BMS`	Wake the BMS remote	`true`
`<topic>/Device_Control/Pack_Relais`	switch the relais on GPIO14 if its set to Manual	`true` `false`

If you don't have the willingness to tinker and learn... TURN BACK!

This project is not a commercial product and support is limited. You have to be willing to research and solve potential problems yourself.