BMS Tips & Tricks - softwarecrash/Daly2MQTT GitHub Wiki

All settings described here are done AT YOUR OWN RISK!

Charge detection

Daly ships the BMS with a preset threshold. As long as this threshold is not reached, the BMS does not recognize that it is being loaded. In installations where the BMS is loaded with a low power, it often results in the BMS not turning on and/or also not sending the associated values to Daly2MQTT. This threshold can be changed with the PC software and appropriate cable:

Step 1: Read values

Switch to the "Readparam" tap and click on the highlighted "Read" button.

Step 2: Customize values

Switch to the "Parameter Settings" tab and adjust the martied value according to the needs. After that click on the marked "Set".

If you don't have the PC software, you can get it here.