Protocol Modules - sipcapture/captagent GitHub Wiki
Protocol modules are used by captagent to process specific protocol pipelines.
Protocol modules are loaded at startup by the captagent.xml general configuration.
<configuration name="modules.conf" description="Modules">
<modules>
...
<load module="protocol_sip" register="local"/>
<load module="protocol_rtcp" register="local"/>
...
</modules>
</configuration>
Note: This list is probably incomplete by the time you read it. You can get all functions available here: protocol_sip.c
| Function | Description |
|---|---|
sip_check("method", "INVITE") |
only INVITE requests |
sip_check("rmethod", "REGISTER") |
REGISTER requests and answers (CSeq) |
sip_check("response", "200") |
only 200 responses |
sip_check("response_gt", "400") |
only responses >= 400 |
sip_check("response_lt", "199") |
only responses <= 199 |
sip_check("from_user_suffix", "tail") |
check if from_user has "tail" as suffix |
sip_check("to_user_suffix", "tail") |
check if to_user has "tail" as suffix |
sip_check("from_user_prefix", "head") |
check if from_user has "head" as prefix |
sip_check("to_user_prefix", "head") |
check if to_user has "head" as prefix |
msg_check("size", "100") |
only packets > 100 bytes |
msg_check("src_ip", "10.0.0.1") |
only packets from 10.0.0.1 |
msg_check("destination_ip", "10.0.0.1") |
only packets to 10.0.0.1 |
msg_check("src_port", "10000") |
only packets from port 10000 |
msg_check("src_port_gt", "10000") |
only packets from ports >= 10000 |
msg_check("src_port_lt", "10000") |
only packets from ports <= 10000 |
msg_check("dst_port", "10000") |
only packets to port 10000 |
msg_check("dst_port_gt", "10000") |
only packets to ports >= 10000 |
msg_check("dst_port_lt", "10000") |
only packets to ports <= 10000 |
sip_is_method() |
check whether this is a request |
parse_sip() |
check for valid SIP message |
light_parse_sip() |
check whether Call-ID Header is valid |
parse_full_sip() |
check for valid SIP and parse Contact and Via header |
sip_has_sdp() |
check whether sip packet has sdp |
is_flag_set("1", "0") |
check whether flag named "1" has value "0" |
send_reply("200", "OK") |
generate a reply from Captagent |
clog("ERR", "foo") |
generate error log line |
clog("NOTICE", "foo") |
generate notice log line |
clog("foo", "bar") |
generate debug log line |