202001_jeffrey - silenceuncrio/diary GitHub Wiki

2020-01

- 02 03 -
- 06 07 08 09 10 -
- 13 14 15 16 17 -
- 20 21 22 - - -
- - - - 30 31

  • 02
    • m330[release/v0.08] - new field 'Service Name' at 'PPPoE Client Configuration' sectiion of 'WAN > Ethernet' web page
    • m330[release/v0.08] - add 'szServiceName' into apply of pppoe.cgi
    • m330[release/v0.08] - add 'szServiceName' into set and apply logic of pppoe.cgi
    • m330[release/v0.08] - new field 'Service Name' at 'PPPoE Client Configuration' section also for 'setting wizard' web page
  • 03
    • m330[release/v0.08] - add 'disconnect' for 'Manage Known WiFi Networks' at 'WAN > WiFi STA' web page
  • 06
    • m330[release/v0.08] - at 'WAN > WiFi STA' web page, do not get the status until vm.status.scan_count != 0
  • 07
    • m330[release/v0.08] - implement grek - GRE Tunnel Keepalive
    • m330[release/v0.08] - add 'Country Code' field at 'WAN > WiFi STA' web page
  • 08
    • m330[release/v0.08] - suitable label for different priority at 'WAN > Priority' web page
    • M300[release/v2.02] - offer a checkbox to control whether auto show the setting wizard at 'Management > Administration' page
  • 09
  • 10
    • m330[release/v0.08] - GRE support tunnel keepalive
  • 13
    • GRE tunnel keepalive 整合測試
    • m330[release/v0.08] - correct the title of GRE edit web page
  • 14
    • m330[release/v0.08] - handle keepalive request by ourself when gre interface down
    • m330[release/v0.08] - apply gre while receive event ICOS_WAN_GATEWAY_UPDATE
  • 15
    • m330[release/v0.08] - refactoring the 'WAN DNS' at status page
    • m330[release/v0.08] - broadcast event when gre interface up/down
    • m330[release/v0.08] - while receive event ICOS_WETH_LINK_UP, apply gre again
    • m330[release/v0.08] - in gre, use event ICOS_WAN_IP_UPDATE to replace ICOS_WAN_GATEWAY_UPDATE and ICOS_WETH_LINK_UP
  • 16
    • prepare the working environment for m350
  • 17
    • prepare the working environment for m350
  • 20
    • M350 web server
    • M300[release/v2.02] - apply the same web ui to CID 80(PLANET2) with CID 2(PLANET)
  • 21
    • m330[release/v0.08] - apply the 'Easy Web UI' for profile HYTEC/2_HYTEC_KOREA
    • m330[release/v0.08] - add 'Diagnosis > TTY2TCP' web page
    • m330[release/v0.08] - correct the icon at the title of 'Diagnosis > TTY2TCP' web page
  • 22
    • m330[release/v0.08] - turn off PROSRC_CUSTOMIZE on all profile
    • m330[release/v0.08] - give a hyperlink to the allnet website on the logo at the top banner
    • M300[release/v2.02] - CID 0002 can upgrade to CID 0080
  • 30
    • m350[develop] - add the setenv module for lighttpd
    • m350[develop] - start the web by itself
  • 31
    • m350[develop] - nomore send ICOS_BOOTINIT_DONE event to web by itself