Install Shunya OS

Shunya Interfaces comes pre-installed with version 0.3-Beta of Shunya OS. To use shunya interfaces you need Shunya OS installed.

Pre-requisites

1. Shunya OS Supported boards
2. SD card reader
3. SD card
4. Laptop

Installing Shunya OS

Step 1 : Install Etcher

For Ubuntu 16.04

1. Download balenaEtcher for Linux.
2. Extract the zip file.
3. Run AppImage sudo ./balenaEtcher-xxx.AppImage

For Windows

1. Download balenaEtcher for Windows.
2. Run balenaEtcherSetup-xxx.exe

Step 2 : Flash Shunya OS

1. Download Shunya OS
2. Right click on the downloaded zip file.
3. Click Extract here.
4. Open Etcher.
5. Click Select Image.
6. You will find the Shunya OS .img file in the folder that we had extracted earlier.
7. Select shunya-aaaa-image-xxxx.img file.
8. Insert SD card.
9. Click on Flash.

This will start loading the SD-card with Shunya OS.

Step 3 : Booting Up with Shunya OS

1. Insert the SD card into the board
2. Connect Keyboard and Mouse to the board
3. Connect Monitor (if available ) to the board
4. Connect Power Supply

The board should boot up to Shunya OS.

Login

Login with these credentials:

• Username : shunya
• Password : shunya