Teckin SP23 - seurat-atreides/Sonoff-Tasmota GitHub Wiki

The Teckin SP23 is wifi enabled smart plug with the ability to remotely monitor power consumption and turn devices on and off.

Details:

The Teckin SP23 appears to be a clone of the BlitzWolf SHP2 hardware with Tuya software / firmware.

The uses an ESP8266EX and is capable of switching up to 16 amps at 250 VAC.

2 Teckin SP23s (marked V1.2) bought from Amazon UK in January 2019 have been flashed successfully and use BlitzWolf SHP2 Sonoff configuration. Voltage calibration may be required for accurate power monitoring.

How to flash:

No hardware preparation is required to flash if you are confident about having the same version and can easily be flashed following the procedure detailed at here using https://github.com/SynAckFin/TuyOTA

This results in a fully functional device when using the BlitzWolf SHP2 config.

Consider this risky until more users report supported! (I have tested on 2 devices with success.)

Flashing over serial guide by Marcus Bennett:

Flashing over serial

How to disassemble if desired:

If you wish to confirm you have the same hardware the Teckin SP23 can be opened by hitting each side of the plug at the lip with a rubber mallet or similar. This will leave a visually unblemished enclosure which can be resecured with superglue or similar.

Disassembled device pictures:

Full album

OpenHab configuration

sonoff.items:

Switch BlitzwoIFSHP2 "Switch"  { mqtt=">[broker:cmnd/BlitzwoIFSHP2/POWER:command:*:default],<[broker:stat/BlitzwoIFSHP2/POWER:state:default]" }
Number Power_Total "Total: [%.3f kWh]"  { mqtt="<[broker:tele/BlitzwoIFSHP2/SENSOR:state:JSONPATH($.ENERGY.Total)]" }
Number Power_Today "Today: [%.3f kWh]"  { mqtt="<[broker:tele/BlitzwoIFSHP2/SENSOR:state:JSONPATH($.ENERGY.Today)]" }
Number Power_Yesterday "Yesterday: [%.3f kWh]"  { mqtt="<[broker:tele/BlitzwoIFSHP2/SENSOR:state:JSONPATH($.ENERGY.Yesterday)]" }
Number Power "Power: [%.1f Watt]"  { mqtt="<[broker:tele/BlitzwoIFSHP2/SENSOR:state:JSONPATH($.ENERGY.Power)]" }
Number Voltage "Voltage: [%.0f V]"  { mqtt="<[broker:tele/BlitzwoIFSHP2/SENSOR:state:JSONPATH($.ENERGY.Voltage)]" }
Number Current "Current: [%.3f A]"  { mqtt="<[broker:tele/BlitzwoIFSHP2/SENSOR:state:JSONPATH($.ENERGY.Current)]" }
Number Factor "Factor: [%.2f]"  { mqtt="<[broker:tele/BlitzwoIFSHP2/SENSOR:state:JSONPATH($.ENERGY.Factor)]" }

default.sitemap:

Switch item=BlitzwoIFSHP2 label="BlitzWoIF SHP2" icon="socket" mappings=[OFF="Off",ON="On"]		
Text item=Power label="Power: [%.1f Watt]" icon="energy"
Text item=Voltage label="Voltage: [%.0f V]" icon="energy"
Text item=Current label="Current: [%.3f A]" icon="energy"
Text item=Factor label="Factor: [%.2f]" icon="energy"
Text item=Power_Total label="Power Total: [%.3f kWh]" icon="energy"
Text item=Power_Today label="Power Today: [%.3f kWh]" icon="energy"
Text item=iPower_Yesterday label="Power Yesterday: [%.3f kWh]" icon="energy"

Home Assistant configuration

configuration.yaml

switch:
  - platform: mqtt
    name: "Blitzwolf"
    state_topic: "stat/blitzwolf/POWER"
    command_topic: "cmnd/blitzwolf/POWER"
    payload_on: "ON"
    payload_off: "OFF"
    retain: false
  
sensor:
  - platform: mqtt
    name: "Blitzwolf Energy Today"
    state_topic: "tele/blitzwolf/SENSOR"
    value_template: '{{ value_json["ENERGY"]["Today"] }}'
    unit_of_measurement: "kWh"
  - platform: mqtt
    name: "Blitzwolf Energy Yesterday"
    state_topic: "tele/blitzwolf/SENSOR"
    value_template: '{{ value_json["ENERGY"]["Yesterday"] }}'
    unit_of_measurement: "kWh"
  - platform: mqtt
    name: "Blitzwolf Energy Total"
    state_topic: "tele/blitzwolf/SENSOR"
    value_template: '{{ value_json["ENERGY"]["Total"] }}'
    unit_of_measurement: "kWh"
  - platform: mqtt
    name: "Blitzwolf Power"
    state_topic: "tele/blitzwolf/SENSOR"
    value_template: '{{ value_json["ENERGY"]["Power"] }}'
    unit_of_measurement: "W"
  - platform: mqtt
    name: "Blitzwolf Voltage"
    state_topic: "tele/blitzwolf/SENSOR"
    value_template: '{{ value_json["ENERGY"]["Voltage"] }}'
    unit_of_measurement: "V"
  - platform: mqtt
    name: "Blitzwolf Power Factor"
    state_topic: "tele/blitzwolf/SENSOR"
    value_template: '{{ value_json["ENERGY"]["Factor"] }}'

Attention

Consider flashing your device risky as only four successfully flashed devices have been reported (04/03/2019).