Oittm Smart Plug - seurat-atreides/Sonoff-Tasmota GitHub Wiki
Oittm Smart Plug
Oittm provides a relatively cheap Wifi smart plug with an ESP8266, too.
To enable the flash mode of the ESP connect GPIO 0 to GND. The wires have to be soldered directly onto the ESP chip itself, it won't work otherwise.
Opening the device
Remove the small plastics caps on the back and unscrew the first two screws and then again the next ones
PCB layout
!!Make sure to flash with 3.3V and disconnect the power plug from the power outlet before!!