Gosund SP1 - seurat-atreides/Sonoff-Tasmota GitHub Wiki

https://www.amazon.de/gp/product/B0777BWS1P

There are three clones -- use the device type Teckin:

  • Gosund SP1 (Version 2.3)
    • To configure select Gosund SP1 v23 (55) or console command Module 55
  • Gosund SP1 (Version 2.4)
    • To configure select Gosund SP1 v23 (55) or console command Module 55
  • BlitzWolf SHP2 (Version 2.3)

For more pictures see: https://www.bastelbunker.de/gosund-sp1-mit-tasmota/

Calibration

if you have another (better) volt and power meter: in the web-interface -- console: Enter the (correct) reading with the following commands should increase the precision

  • VoltageSet [Volt]
  • PowerSet [Watt]
  • CurrentSet [Current]

You can use any consumer eg. a lamp or a pressing iron.

Details

Board - copy from issues/4303

Pins - copy from issues/4303

GPIO 0 - copy from issues/4303