serial - sdon2/thermal-printer-tray GitHub Wiki

• ✅ 2.1 | ⛔ 2.0 | ⛔ 1.9 | ...

Read and write data to a serial, parallel or virtual serial port.

qz.serial.findPorts().then(function(ports) {
   console.log(ports);
}).catch(displayError);

• Open a serial port: openPort(port, bounds)

  var properties = {
     rx: {
        start: '\x02',
        end: '\x0D',
        width: null
     },
  
     baudRate: 9600,
     dataBits: 8,
     stopBits: 1,
     parity: 'NONE',
     flowControl: 'NONE'
  };
  
  // WARNING:  Since 2.0.7 baud properties should be set here in openPort()
  qz.serial.openPort('COM1', properties).then(function() { // or '/dev/ttyUSB0', etc
      console.log('COM1 opened');
  }).catch(function(err) {
      console.error(err);
  });

  • Note: For versions 2.0 and older, the properties syntax does not use the rx { } object, but instead uses start, end, width. Backwards support for the 2.0 syntax is deprecated in 2.1 versions.

• Close a serial port closePort(port)

  qz.serial.closePort('COM1').then(function() {  // or '/dev/ttyUSB0', etc
      console.log('COM1 closed');
  }).catch(function(err) {
      console.error(err);
  });

1. Send data to the open serial port via sendData(port, data, properties)

Note: The default sendData() settings must be changed for Mettler Toledo scales

var data = 'hi, serial port\n';

// WARNING:  sendData() properties are deprecated in 2.0.7.  Baud properties should be set in openPort() instead.
qz.serial.sendData('COM1', data).catch(displayError);

The default settings need to be changed for serial communication to work with Mettler Toledo scales.

var data = 'W\n';   // <--- Weight command - Also works with 'W\r'

var properties = {
   // ...

   baudRate: 9600,
   dataBits: 7,     // <--- Changed from 8
   stopBits: 1,
   parity: 'EVEN',  // <--- Changed from NONE
   flowControl: 'NONE'
};

// WARNING:  sendData() properties are deprecated in 2.0.7.  Baud properties should be set in openPort() instead.
qz.serial.sendData('COM1', data, properties).catch(displayError);

1. Use a callback for processing the data returned from the serial port.

   qz.serial.setSerialCallbacks(function(evt) {
      if (evt.type !== 'ERROR') {
         console.log('Serial', evt.portName, 'received output', evt.output);
      } else {
         console.error(evt.exception);
      }
   });

If no ports will list or if you receive Permission denied in Linux (bugs.launchpad.net#949597)

Error: Port name - /dev/ttyUSB0; Method name - openPort(); Exception type - Permission denied.

1. Run the following command:

   sudo usermod -a -G dialout "$USER"

2. Log out of the desktop (or reboot)

3. Log in to the desktop, try again