Surround lighting with satellites - sblantipodi/firefly_luciferin GitHub Wiki

Discover the next level of immersion with Luciferin Surround Lighting.
Sync on-screen content through the Luciferin Satellites Manager and have your smart lights seamlessly mirror whatever you are watching, playing, or listening to!

The Satellites Manager lets you add or remove devices that act as separate channels in your setup.

Satellites receive the same input as the main instance behind your monitor/TV, but can focus on a smaller portion of the display—for example, a left or right channel.

How to configure satellites

The Satellite Manager is available under the Devices tab. Configuration is straightforward:

  1. Enter the IP address of the satellite device.
  2. Choose the display zone managed by the satellite (e.g., top, right, left, bottom, or all zones).
    You can configure a custom LED zone in the Test Image section.
  3. Set the number of LEDs attached to the satellite.
  4. Choose the algorithm to use (average or average on all LEDs).
  5. Click the + button.

Satellites will appear in the satellites table:

Click Ok and you're done.

Notes

  • Satellites work on Full firmware only and require WiFi.
  • Luciferin can handle as many satellites as you want with no additional performance cost.
  • Screen capture begins once all satellites are engaged by the software.