Reading Master System games - sanni/cartreader GitHub Wiki

Video of dumping a SMS cartridge

IMAGE ALT TEXT HERE

Setup

To read a Master System cartridge you must set the config switches like this:

Next plug the Master System cartridge into the SMS to MD adapter and the adapter into the MD slot of the cartridge reader. Currently only standard cartridges without any special mapper chips nor SRAM are supported.

The SMS to MD adapter is based on the design by Raphnet. For use with the Cart Reader ignore the SMD footprints on the PCB, the adapter does not need any components. I only bridged R5 to connect the reset line, although I'm not sure if this is even needed.