Firmware Dumping Guide - samuelpx/Ryujinx GitHub Wiki

Thanks to Candy for providing the guide details & images. Loosely based off of NH Switch Guide.

What you will need:


  1. Make sure your sysMMC is up to date. If your sysMMC is not up to date, update it through System Settings.

  2. Boot your Switch into RCM.

  3. Using a Payload Injector, such as TegraRcmGUI or fusee-interfacee-tk, inject the TegraExplorer.bin Payload (like you would with Hekate).

Screenshot 2022-12-03 at 10 45 13 PM

  1. Using the joystick and the A buttons, select FirmwareDump.te.

Screenshot_0a75c7c9

  1. Select Dump sysmmc.

Screenshot_0ad4061c

  1. Wait about 1-2 minutes for the tool to dump your firmware.

Screenshot_0d9ca2b9

  1. When the tool finishes, press any button.

  2. Select Power off.

Screenshot_2dec46de

  1. Remove the SD card from your Switch, and insert it into your PC.

  2. A folder containing your firmware should now exist at /tegraexplorer/Firmware/<version-number>

Screenshot 2022-12-03 at 11 09 38 PM