Tiny Talon - rotorflight/rotorflight GitHub Wiki
Rotorflight Wiki is replaced by www.rotorflight.org.
The Tiny Talon F7 is an F722 based FC that runs on 2S to 4S. It is a 16x16mm mounting pattern FC and 15A ESC stack.
The Tiny Talon F7 uses the TalonF7V2 Target. Flash Rotorflight using this target and select 'Load Custom Defaults' before applying the remapping files shown below.
There are three assignment options for the Tiny Talon F7. Two Motorized Tail versions (MT)(A) and (MT)(B) and a Servo Tail (ST).
Motorized Tail option A
Download the file below and Load config file to configure the servos and motors for the Motorised tail (A) option.
Motorized Tail option B
Download the file below and Load config file to configure the servos and motors for the Motorised tail (B) option.
Servo Tail option
Download the file below and Load config file to configure the servos and motors for the Servo tail option.
. The configuration Diff file for this helicopter is located in the Examples repository.
(Diff files required Here)