Lineup Tracking - rollerderby/scoreboard GitHub Wiki

For lineup tracking tablets with about 10" screen diagonal and a 1080 resolution generally work quite well.

Screenshot_20200305_165258

Basic procedure

Before the game

  • If lineup tracking mode is disabled, there will be a popup saying so. Tap "Enable" to enable lineup tracking mode.
  • If you haven't selected a team, there will be a popup that allows selecting a team. Mark the team you are supposed to track and press "Save".
    • If you want to change your selection, you can get back to the popup by tapping the team name in the header row.
  • If there is an orange "Go To Current Game" indicator at the top of the screen tap it.

Before the Jam

  • Once the skaters take to the track, mark the lineup for your team by tapping the "J", "P", or "B" column for the jammer, pivot, and blockers respectively.
    • You can copy the lineup from a previous jam by tapping the corresponding jam number in the paperwork part of the screen.

During the Jam

  • (Only when CRG is not used for penalty box timing) When a skater is sent to the box, wait until they sit down, then tap the "Box" button for that skater. The button will turn light blue and get an exclamation mark in the corner when the penalty tracker enters a penalty for the skater and red with a dash in the corner once the skater is marked as sitting.
    • For skaters that only sit after the jam ends don't do anything at this point.
  • (Only when CRG is not used for penalty box timing) When a skater is released, mark that by tapping their "Box" button again.
  • In the case of a star pass you don't have to do anything. The star pass indication will be taken from the scoreboard operator.
    • You can tell that the scoreboard operator marked the SP by the small SP indicator in the top row turning green and an SP row appearing at the top of the paperwork.

At Jam end

Once the scoreboard operator marks the jam end, the column next to the "Box" buttons will turn orange with the text "Go To Next Jam"

  • Make sure you are done recording the ending jam's lineup and you or the PBT have recorded all box entries and leaves that happened before he jam was over.
    • For skaters that sit down close to the whistle, agreeing on a hand signal with the penalty box officials can help getting a quick clarification.
  • Once you are done with the ended jam, tap "Go To Next Jam". All skaters that are not in the box and don't have an unserved penalty credited to them will be placed back on the Bench.
  • (Only when CRG is not used for penalty box timing) Now mark all skaters in the box that sat down between jams.
    • If a skater doesn't have an unserved penalty entered for them, you will have to enter them to their position before you can mark them in the box. In this case you may also want to make the PT aware of the missing penalty, if they aren't already.
  • Unless you have reached the end of the period continue with the Before the Jam part for the next jam.

Less common situations

Substitutions

Note: If CRG is used to time penalties, the PBT can enter substitutions as well.

  • Finish the jam end procedure above.
  • If the substituted skater never sat down, mark them as sitting down now.
  • Tap the menu icon next to the substituted skater's "Box" field.
  • In the button row select the substituting skater.

Self-reports and overturned penalties

  • If the box trip is still ongoing
    • Tap the menu icon next to the penalized skater's "Box" field.
    • In the popup select "No Penalty" or "Penalty Overturned" as appropriate.
  • If the box trip has been completed
    • In the paperwork find an entry corresponding to that box trip and tap it.
    • In the popup select "No Penalty" or "Penalty Overturned" as appropriate.
    • Close the Popup.

Undo ending a box trip

Note that simply tapping the "Box" field again would start a new box trip which is not correct.

  • During a Jam:
    • Tap the menu icon next to the "box" field.
    • In the popup tap "Unend Box Trip".
  • Outside of a Jam:
    • In the paperwork find the entry for that skater in the top row and tap it.
    • In the "Box Trips" section of the popup identify the correct trip. Tap the "+" button in the "End" column until the value next to it reads "ongoing".

Changing start and end point of a box trip

  • In the paperwork find an entry corresponding to that box trip and tap it.
  • In the "Box Trips" section of the popup identify the correct trip. Tap the "+" and "-" buttons in the "Start" and "End" column to adjust the corresponding values.
  • Close the popup.

Injury call offs etc.

When a skater has to sit out after an injury calloff or substitution

  • In the paperwork find their entry for the jam that just ended. (It should be in the second row from the top if you are recording this as it happens.) Tap that entry.
  • In the popup that opens tap "Sit out next 3".
  • Close the popup.

No pivot fielded

  • Simply mark all 4 blockers as such. Note: There is currently a bug where the 4th blocker is sometimes marked as a pivot. If this happens, simply tap the "B" field again to fix.

Empty spots

  • When the team fields fewer blockers than they are allowed to, tap the "?" in the current jam.
  • In the popup select "No Skater fielded".
  • Close the popup.

Note: If the team actually fielded a skater but you didn't spot who it was leave the "?".