Production Work order general Work order document WO document items Edit work order item Master data tab - robinfeng/beashelp GitHub Wiki
主数据页签
Navigation: Production > Work order general > Work order document > WO document items > Edit Work Order Item: Master Data tab No contents entries on this page Contents Work orders Work order document Work order item Edit work order item Master data Extended Link Parameters Documents Journal
Field Meaning Info Any information Drawing No. Drawing number as per item master Raw Material Raw material as per item master Match Code Match code as per item master DIN DIN as per item master Revision Revision number of the selected item version. (copied from item version control, if activated) BOM hmtoggle_plus1 Which BOM to use for assembly breakdown Field is visible only, if item version control was activated.
Select the BOM to be inserted to the work order. It is determined via Item or Item version. If the field is empty, no BOM will inserted. Depending on the settings, the routing is determined via BOM.
(beas9.1-004-000, BEAS_FTPOS.StlItemCode) Routing hmtoggle_plus1 Which routing to be used Field is visible only, if item version control was activated and if the routing is not firmly linked to the BOM but may be selected independently of the BOM. See Configuration wizard
The routing selected here will be used in the work order. It is determined via Item or Item version. Depending on the settings, the routing is determined via BOM.
(beas9.1-004-000, BEAS_FTPOS.RoutingId) Unlock Manually Only when creating in function: If this switch is activated, the user can determine which bill of material positions and routing positions should be added to the work order. For this purpose, all positions are shown in advance and you can define which positions should be used for this using a check mark. Printed? If active, work order was printed. The print date is displayed next to it. Can be activated or deactivated here manually Closed If production closed for this assembly? The assembly can only be closed using the "Close" button and depending on closing rules. See Configuration wizard Finished Number of assemblies that were reported as finished. The number of entries plus the manual assembly yield is counted.
It is also possible to issue manual "Finished" messages. Use the input field beside the finished quantity to do this. The field is only visible if the option manually input of completion has been activated in Configuration Wizard - Production - Display - Position.
Time receipts of non storage related assemblies, which do not cause a material posting are counted in this field. Project Reference to project (SAP Administration - Definition - Financial - Project)
Release At assembly level, release (set hooklet) or blocking can be managed (remove hooklet). By default, everything is enabled. Feld Meaning Approved hmtoggle_plus1 Work order approved? This information is displayed in MRP and in other lists. It set automatically, with respective settings in Configuration wizard.
It can be used for release procedures. Capacity planning Active : Capacity planning allowed Material planning Active : Material planning allowed Login to work order Active : Login to work order allowed Material posting Active : Material posting allowed Printed? Set hooklet yes/no Closed Set a hooklet and chose a date (calendar in drop down field) Completed Reported number of completed assemblies
back to Work order position
返回 主页