Production Factory data capture Terminal Client Server based - robinfeng/beashelp GitHub Wiki
C/S架构
Navigation: Production > Factory Data Capture > Terminal: Client-Server based No contents entries on this page Contents Logon: Enter card number to logon. All released apps are displayed. After 20 seconds of idle time the user is logged off automatically. This timeout can be set up. At logon it is checked, which applications are to be used. (set up in Station settings). If a person logs on, it is checked, whether a satin specific menu was set up. If there is none, the menu is used, set up in Personnel master.
Note As long no Authorization group was created, Standard-Apps are displayed. After one authorization group was created, you need to store on in Personnel master of an employee, otherwise he will not have access to the Terminal In station settings, you can set up: Control (mouse/keyboard), Image (Logo), preview screen, menu.
Right click menu: Function Meaning Cancel Terminal is closed. If started in terminal mode, the user needs to enter his card number before, to prevent a logoff by chance. Note: If the terminal is not started in terminal mode and another user logs on there than in the application, then all postings and material movements outside the terminal screen are connected to the user who logged on the terminal. This situation continues until a logoff in terminal screen. Logoff Employee logs off immediately. Also ESC-key can be used. After 20 seconds of idle time the user is logged off automatically, if no other window is opened.
This logoff time (timeout) can be changes in station settings see work station settings
For attendance time registration a shortened timeout can be activated. This is done in the configuration wizard. see Configuration wizard - Attendance - Terminal Zoom Only in Terminal-Mode: „Zoom“-Function accessible via right click or Crtl+Z. Enter a value between 90 and 170 to apply a zoom factor (in percent) All sub-screens are affected. Mode: Keyboard Switch to keyboard control. For each button a letter is displayed to call the function. This settings can also be set up globally for all work stations in Station settings wizard - Edit (beas9.0-000-002-007) Mode: Mouse Switch to mouse control, optimized for mouse or touchscreens. This settings can also be set up globally for all work stations in Station settings wizard - Edit (beas9.0-000-002-007)
see Personnel master data Program group Administration
linktraining
Video:Introduction to beas terminal
Note: Until beas8.80 an different Client-Server-based Terminal solution was available. If you want to use this old terminal, activate in Configuration wizard - attendance – „Terminal: 2009/8.80-Version. The FDC Terminal is configured in Station settings wizard
Time synchronization The terminal does use the server time, not the time of the client. Time zone settings of Windows System - Time zone is taken into account. For permission reasons beas does not synchronize with the time of the operating system. It may be that on the client a time is displayed which is different from the terminal program. The terminal program synchronizes with the server in 30 minute intervals. This way, a correct time is always guaranteed, as long as the time on the SQL server is set correctly. (30-minutes synchronization from beas-Version beas9.0-000-003-014 )
back to Terminal