Inventory Bill of materials BOM batch change - robinfeng/beashelp GitHub Wiki
BOM 批量修改
Navigation: Inventory > Bill of materials: Batch changes No contents entries on this page Contents This function allows to change multiple BOMs at once. First, select change type and the material number to be replaced in the BOMs. This is done under tab "replace". Under "add" new information will be displayed. Pressing "START"all affected BOM positions are displayed. Mark positions to be replaced/removed and press START again to start the process.
The tabs and the switch on the bottom of the screen provide the same function. Function Meaning Selection Filter options by: Item number, item group, match code. Conditions such as "contains" or "does not contain" are available in the selection fields. Replace In the right window positions are selected, where values are to be replaced. On the left side, the new information is entered to the appropriate fields. All BOMs with the specified material number can be changed. In the selected fields (material number, quantity, additional text, etc.) the values stored here are inserted. After finishing all entries, the replacement process is started by clicking "Start". Add Select items to be added to the BOM. For selection the item report is displayed. Data to be entered is displayed on the left side. Then new BOM is inserted wherever the previously defined material number exists. Items will be appended or inserted at the specified position. In the latter case the previous item is replaced. Delete Display BOM items to be deleted. (Selection from the list and then press START)
Replace tab Function Meaning Material number which item number to insert Quantity which quantity to insert Note: changing the quantity, conversion factors are not considered. Quantities are specified in consumption units, stored conversion factors will be removed. (The fields beas_stl.input_qty, input_factor, input_unit will be deleted) Quantity per Requirement per assembly See quantity per Additional text free text Active (left and right box) Left box: set hooklets to select this parameter to be changed. Right checkbox: enable to set the BOM item to active Disable to set the BOM item to inactive empty fields UDF Free user-defined fields can be named in the configuration wizard.
Add tab Function Meaning Add for end Append the new item at the end of the BOM Position The new item will inserted at the given position Material number Selected material number for which the change applies Quantity Selected quantity Quantity per Requirement per assembly See quantity per Additional text free text Active Check mark indicates whether the BOM items will be active or inactive after the change process. The status is changed in the "replace" tab (See above) empty fields UDF Free user-defined fields can be named in the configuration wizard
back to Bill of Materials tab
返回 主页