Administration System initialization Station settings wizard - robinfeng/beashelp GitHub Wiki

工作站设置向导

Due to the differences between the versions 8.8 and 2009 the description of the station settings wizard for beas 2009 SP1 is to be found in a separate chapter. Here follows the description for beas 8.8.

The station settings wizard is the control center setting and monitoring all stations and sessions. Here, all computers or sessions are displayed, which are logged on to beas. Furthermore, the following functions are available:

View and manage stations (name, location, description)
Manage stations (display total and remaining memory, disk space)
Terminal: set up which functions are available (right click menu or button below)

Stations tab Field Description Station Short description Station name Name of the station. In virtual machines or terminal sessions the environmental variable „SESSIONNAME“. If it is „CONSOLE“, then the computer name is used. Sessionname ist usually, the name of the user, who logs on to the terminal session. First logon First logon to beas Last logon Last logon to beas Last user Last user who logged on beas Version installed beas version DB server Name of data base server DB name Name of the data base logged on Memory total Total physical memory in MB Memory free Available physical memory in MB. If less than 250 MB, secure operation cannot be guaranteed c:\free GB Free disk space c:\ If less than 5 GB, you should take action. Session name Name of current session IP IP-Address of the client MAC MAC-Address of the client GID Kaba-Benzig-GID-Address DID Kaba-Benzig-DID-Address Language Selected language Browser Used browser OS Used operating system Serial number Kaba-Benzig-serial number - or free to use Type Kaba-Benzig-Type - or free to use

API and FTP settings Connection settings of the current PC. These are not related to a data base, therefore set up only for the station, on which the station settings wizard was started. Data connection Field Description License server Port address of the license server. Must only be specified if there are multiple license servers in the server infrastructure or the license server is not found. DI-API-SQL-Driver SQL driver which should be used for connection to the DI API. Only change if the automatic setting does not work. B1 API User Must normally be the SAP manager, as this account is also used to perform administrative functions such as database adaptations. SBO API Set Password The password for the DI API user SBO API Test Tests the connection to the DI API Important: If beas is started within SAP, a SAP-internal connection to the DI API is established. If beas is started without SAP or a data check is performed BEFORE login, a separate connection is established. This can be tested here. Program server Location at which beas is installed on the server. Normally \<servername\b1_shr beas checks whether an upgrade is available in this directory. If you do not want this check to be performed, enter "no" here.

FTP The FTP connection is set up in this area. Setting is only necessary if the basic configuration does not work. The FTP connection is required for licensing. Field Description Account Your user name for access to the beas support server. So far no services have yet been offered. For this reason the field must be empty. Password Password for this account. Leave blank generally. FTP address Address of the FTP server. Leave blank generally so that the default address is used. Passive mode Passive mode is used. Passive use host address Only visible in passive mode. Please only configure for problems.

(Extract from documentation of Chilkat FTP client) This can handle problems that may arise when an FTP server is located behind a NAT router. FTP servers respond to the PASV command by sending the IP address and port where it will be listening for the data connection. If the control connection is SSL encrypted, the NAT router is not able to convert from an internal IP address (typically beginning with 192.168) to an external address. When set to 1, PassiveUseHostAddr property tells the FTP client to discard the IP address part of the PASV response and replace it with the IP address of the already-established control connection. The default value of this property is 0. Port If the default port should not be used, the port can be specified here manually. Proxy mode Is there a proxy server? If so, the type can be configured here. On activation, all other proxy properties are displayed. The following settings are possible : (Extract from documentation of Chilkat FTP client) ProxyMethod = 1 (SITE site) USER ProxyUsername PASS ProxyPassword SITE Hostname USER Username PASS Password

ProxyMethod = 2 (USER user@site) USER Username@Hostname:Port PASS Password

ProxyMethod = 3 (USER user@site) USER ProxyUsername PASS ProxyPassword USER Username@Hostname:Port PASS Password

ProxyMethod = 4 (USER/PASS/ACCT) USER Username@Hostname:Port ProxyUsername PASS Password ACCT ProxyPassword

ProxyMethod = 5 (OPEN site) USER ProxyUsername PASS ProxyPassword OPEN Hostname USER Username PASS Password

ProxyMethod = 6 (firewallId@site) USER ProxyUsername@Hostname USER Username PASS Password Proxy Hostname Name of proxy server Proxy Password Password for proxy server Proxy Port Port Proxy Username Username Test connection Connection is tested. If an error message results, a window containing the analysis opens. Use the PAGE key to scroll down.

Current data base connections tab Field Description Hostname Hostname Programmname Name of the executed program Status current status ( runnable, sleeping) Cmd Last command Last Batch Last batch run Login Time Login Time SPID: Process number Current Command: SQL-command, which was executed with this process Blocked from: If greater than 0, blocked by the given process Blocked command: Last command of the blocking process

Buttons Field Meaning Edit Open station entry to edit New Create new work station, the editing screen opens Terminal settings Opens the window Terminal settings

back to station settings wizard

返回主页