Audio and Video Services using Ampache 3.8 on CentOS 7.2.1511 - rharmonson/richtech GitHub Wiki
Revised October 12, 2018; wagnered issue #17
Revised October 28, 2017; 3.8.4develop PHP 5.6 requirements / Remi Repo
Published December 3, 2016
The purpose of this article is to provide guidance in building a steaming audio and video service for PC and mobile devices. For several years, I have been using Ampache, primarily, for streaming my music library using a browser and laptop.
Recommended Configuration:
- 1 or 2 CPUs
- 1 or 2 GB RAM
- 20 GB OS Disk
- additional storage for media data
I have successfully used 1 CPU and 1 GB of RAM for streaming media using Ampache, but if you have it, go for 2 CPU and 2 GB of RAM if streaming HD video.
Complete an operating system installation. My CentOS 7 install guide, given below, is not a requirements, but you may need to adjust for components like NetworkManager or firewalld.
https://github.com/rharmonson/richtech/wiki/CentOS-7-1511-Minimal-x86_64-Base-Installation-Guide
The NUX repository provides FFMPEG which will be used for transcoding codecs. The EPEL repository is a dependency for NUX, so it will be installed as well.
Note
Instead of using EPEL and NUX, an alternative would be compiling Ampache dependencies from source.
$ sudo yum -y install epel-release
Results
================================================================================
Package Arch Version Repository Size
================================================================================
Installing:
epel-release noarch 7-8 ovirt-4.0-epel 14 k
Transaction Summary
================================================================================
Install 1 Package
Total download size: 14 k
Installed size: 24 k
$ yum -y install http://li.nux.ro/download/nux/dextop/el7/x86_64/nux-dextop-release-0-5.el7.nux.noarch.rpm
Results
================================================================================
Package Arch Version Repository Size
================================================================================
Installing:
nux-dextop-release
noarch 0-5.el7.nux /nux-dextop-release-0-5.el7.nux.noarch 3.5 k
Transaction Summary
================================================================================
Install 1 Package
Total size: 3.5 k
Installed size: 3.5 k
Requirements as described here: https://github.com/ampache/ampache#requirements
- A web server. All of the following have been used, though Apache
receives the most testing:
- Apache
- lighttpd
- nginx
- IIS
- PHP 5.4 or greater.
- PHP modules:
- PDO
- PDO_MYSQL
- hash
- session
- json
- simplexml (optional)
- curl (optional)
- MySQL 5.x
The requirements listed on Ampache github is missing a number of dependencies.
Here the list of dependencies using my installation.
-
COMPOSER
- getcomposer.org
-
MySQL Database 5.x:
- mariadb
- mariadb-server
-
Web Services:
- httpd (aka Apache)
-
PHP 5.4:
- php
- php-common
- php-mcrypt
- php-pdo
- php-cli
- php-mysql
- php-gd
- php-xml
-
Encryption:
- libmcrypt
-
(de)codec/r:
- ffmpeg
-
Utility:
- git; for obtaining ampache from github
- links (optional); for testing on ampache host, text web browser
Notes:
- curl, json, and libxml2 are installed by default for CentOS 7 Minimal installation
- php-common provides many of the requirements including but not limited to php-hash and php-session
- Many of the packages below are inter-dependent but for clarity, I specify them
Execute the following:
$ sudo yum -y install mariadb mariadb-server httpd php php-common php-mcrypt php-pdo php-cli php-mysql php-gd php-xml libmcrypt ffmpeg git links
Results
================================================================================
Package Arch Version Repository Size
================================================================================
Installing:
ffmpeg x86_64 2.6.8-3.el7.nux nux-dextop 1.5 M
git x86_64 1.8.3.1-6.el7_2.1 updates 4.4 M
httpd x86_64 2.4.6-40.el7.centos.4 updates 2.7 M
libmcrypt x86_64 2.5.8-13.el7 epel 99 k
links x86_64 1:2.13-1.el7 epel 2.8 M
mariadb x86_64 1:5.5.50-1.el7_2 updates 8.9 M
mariadb-server x86_64 1:5.5.50-1.el7_2 updates 11 M
php x86_64 5.4.16-36.3.el7_2 updates 1.4 M
php-cli x86_64 5.4.16-36.3.el7_2 updates 2.7 M
php-common x86_64 5.4.16-36.3.el7_2 updates 563 k
php-gd x86_64 5.4.16-36.3.el7_2 updates 126 k
php-mcrypt x86_64 5.4.16-7.el7 epel 20 k
php-mysql x86_64 5.4.16-36.3.el7_2 updates 100 k
php-pdo x86_64 5.4.16-36.3.el7_2 updates 97 k
php-xml x86_64 5.4.16-36.3.el7_2 updates 124 k
Installing for dependencies:
SDL x86_64 1.2.15-14.el7 base 204 k
apr x86_64 1.4.8-3.el7 base 103 k
apr-util x86_64 1.5.2-6.el7 base 92 k
cairo x86_64 1.14.2-1.el7 base 711 k
faac x86_64 1.28-6.0.el7.nux nux-dextop 269 k
fdk-aac x86_64 0.1.4-1 nux-dextop 375 k
ffmpeg-libs x86_64 2.6.8-3.el7.nux nux-dextop 5.0 M
flac-libs x86_64 1.3.0-5.el7_1 base 169 k
fontconfig x86_64 2.10.95-7.el7 base 228 k
fontpackages-filesystem noarch 1.44-8.el7 base 9.9 k
fribidi x86_64 0.19.4-6.el7 base 63 k
gdk-pixbuf2 x86_64 2.31.6-3.el7 base 559 k
gpm-libs x86_64 1.20.7-5.el7 base 32 k
graphite2 x86_64 1.3.6-1.el7_2 updates 112 k
gsm x86_64 1.0.13-11.el7 base 30 k
harfbuzz x86_64 0.9.36-1.el7 base 156 k
httpd-tools x86_64 2.4.6-40.el7.centos.4 updates 83 k
jasper-libs x86_64 1.900.1-29.el7 base 149 k
lame-libs x86_64 3.99.5-2.el7 nux-dextop 339 k
libICE x86_64 1.0.9-2.el7 base 65 k
libSM x86_64 1.2.2-2.el7 base 39 k
libX11 x86_64 1.6.3-2.el7 base 605 k
libX11-common noarch 1.6.3-2.el7 base 162 k
libXau x86_64 1.0.8-2.1.el7 base 29 k
libXdamage x86_64 1.1.4-4.1.el7 base 20 k
libXext x86_64 1.3.3-3.el7 base 39 k
libXfixes x86_64 5.0.1-2.1.el7 base 18 k
libXft x86_64 2.3.2-2.el7 base 58 k
libXi x86_64 1.7.4-2.el7 base 40 k
libXpm x86_64 3.5.11-3.el7 base 54 k
libXrender x86_64 0.9.8-2.1.el7 base 25 k
libXtst x86_64 1.2.2-2.1.el7 base 20 k
libXv x86_64 1.0.10-2.el7 base 18 k
libXxf86vm x86_64 1.1.3-2.1.el7 base 17 k
libass x86_64 0.13.4-1.el7 epel 92 k
libasyncns x86_64 0.8-7.el7 base 26 k
libavdevice x86_64 2.6.8-3.el7.nux nux-dextop 71 k
libcdio x86_64 0.92-1.el7 base 235 k
libcdio-paranoia x86_64 10.2+0.90-11.el7 base 70 k
libdc1394 x86_64 2.2.2-3.el7 epel 121 k
libgnome-keyring x86_64 3.8.0-3.el7 base 109 k
libogg x86_64 2:1.3.0-7.el7 base 24 k
libpng x86_64 2:1.5.13-7.el7_2 updates 213 k
libraw1394 x86_64 2.1.0-2.el7 base 63 k
librsvg2 x86_64 2.39.0-1.el7 base 123 k
libsndfile x86_64 1.0.25-10.el7 base 149 k
libthai x86_64 0.1.14-9.el7 base 187 k
libtheora x86_64 1:1.1.1-8.el7 base 136 k
libusbx x86_64 1.0.15-4.el7 base 50 k
libv4l x86_64 0.9.5-4.el7 base 194 k
libva x86_64 1.2.1-3.el7 epel 68 k
libvdpau x86_64 1.1-2.el7 base 32 k
libvorbis x86_64 1:1.3.3-8.el7 base 204 k
libxcb x86_64 1.11-4.el7 base 189 k
libxshmfence x86_64 1.2-1.el7 base 7.2 k
libxslt x86_64 1.1.28-5.el7 base 242 k
libzip x86_64 0.10.1-8.el7 base 48 k
mailcap noarch 2.1.41-2.el7 base 31 k
mesa-filesystem x86_64 10.6.5-3.20150824.el7 base 23 k
mesa-libEGL x86_64 10.6.5-3.20150824.el7 base 74 k
mesa-libGL x86_64 10.6.5-3.20150824.el7 base 184 k
mesa-libgbm x86_64 10.6.5-3.20150824.el7 base 40 k
mesa-libglapi x86_64 10.6.5-3.20150824.el7 base 39 k
openal-soft x86_64 1.16.0-3.el7 epel 282 k
openjpeg-libs x86_64 1.5.1-10.el7 base 85 k
opus x86_64 1.0.2-6.el7 base 630 k
orc x86_64 0.4.22-5.el7 base 165 k
pango x86_64 1.36.8-2.el7 base 287 k
perl x86_64 4:5.16.3-286.el7 base 8.0 M
perl-Carp noarch 1.26-244.el7 base 19 k
perl-Compress-Raw-Bzip2 x86_64 2.061-3.el7 base 32 k
perl-Compress-Raw-Zlib x86_64 1:2.061-4.el7 base 57 k
perl-DBD-MySQL x86_64 4.023-5.el7 base 140 k
perl-DBI x86_64 1.627-4.el7 base 802 k
perl-Data-Dumper x86_64 2.145-3.el7 base 47 k
perl-Encode x86_64 2.51-7.el7 base 1.5 M
perl-Error noarch 1:0.17020-2.el7 base 32 k
perl-Exporter noarch 5.68-3.el7 base 28 k
perl-File-Path noarch 2.09-2.el7 base 26 k
perl-File-Temp noarch 0.23.01-3.el7 base 56 k
perl-Filter x86_64 1.49-3.el7 base 76 k
perl-Getopt-Long noarch 2.40-2.el7 base 56 k
perl-Git noarch 1.8.3.1-6.el7_2.1 updates 53 k
perl-HTTP-Tiny noarch 0.033-3.el7 base 38 k
perl-IO-Compress noarch 2.061-2.el7 base 260 k
perl-Net-Daemon noarch 0.48-5.el7 base 51 k
perl-PathTools x86_64 3.40-5.el7 base 82 k
perl-PlRPC noarch 0.2020-14.el7 base 36 k
perl-Pod-Escapes noarch 1:1.04-286.el7 base 50 k
perl-Pod-Perldoc noarch 3.20-4.el7 base 87 k
perl-Pod-Simple noarch 1:3.28-4.el7 base 216 k
perl-Pod-Usage noarch 1.63-3.el7 base 27 k
perl-Scalar-List-Utils x86_64 1.27-248.el7 base 36 k
perl-Socket x86_64 2.010-3.el7 base 49 k
perl-Storable x86_64 2.45-3.el7 base 77 k
perl-TermReadKey x86_64 2.30-20.el7 base 31 k
perl-Text-ParseWords noarch 3.29-4.el7 base 14 k
perl-Time-HiRes x86_64 4:1.9725-3.el7 base 45 k
perl-Time-Local noarch 1.2300-2.el7 base 24 k
perl-constant noarch 1.27-2.el7 base 19 k
perl-libs x86_64 4:5.16.3-286.el7 base 687 k
perl-macros x86_64 4:5.16.3-286.el7 base 43 k
perl-parent noarch 1:0.225-244.el7 base 12 k
perl-podlators noarch 2.5.1-3.el7 base 112 k
perl-threads x86_64 1.87-4.el7 base 49 k
perl-threads-shared x86_64 1.43-6.el7 base 39 k
pixman x86_64 0.32.6-3.el7 base 254 k
pulseaudio-libs x86_64 6.0-7.el7 base 576 k
rsync x86_64 3.0.9-17.el7 base 360 k
schroedinger x86_64 1.0.11-4.el7 epel 291 k
soxr x86_64 0.1.2-1.el7 epel 77 k
speex x86_64 1.2-0.19.rc1.el7 base 98 k
t1lib x86_64 5.1.2-14.el7 base 166 k
x264-libs x86_64 0.142-11.20141221git6a301b6.el7.nux
nux-dextop 570 k
x265-libs x86_64 1.9-1.el7.nux nux-dextop 1.5 M
xvidcore x86_64 1.3.2-5.el7.nux nux-dextop 258 k
Transaction Summary
================================================================================
Install 15 Packages (+116 Dependent packages)
Total download size: 67 M
Installed size: 265 M
A not well documented requirement as of 3.8 is "Composer." A PHP package manager.
You can either install the packages from EPEL or install a binary from getcomposer.org.
$ sudo yum install composer
Results
================================================================================
Package Arch Version Repository
Size
================================================================================
Installing:
composer noarch 1.2.2-1.el7 epel 350 k
Installing for dependencies:
libicu x86_64 50.1.2-15.el7 base 6.9 M
php-PsrLog noarch 1.0.1-1.el7 epel 11 k
php-composer-ca-bundle noarch 1.0.2-1.el7 epel 12 k
php-composer-semver noarch 1.4.2-1.el7 epel 17 k
php-composer-spdx-licenses noarch 1.1.5-1.el7 epel 15 k
php-fedora-autoloader noarch 0.2.1-2.el7 epel 9.0 k
php-intl x86_64 5.4.16-36.3.el7_2 updates 96 k
php-jsonlint noarch 1.4.1-1.el7 epel 16 k
php-justinrainbow-json-schema noarch 2.0.5-1.el7 epel 30 k
php-mbstring x86_64 5.4.16-36.3.el7_2 updates 504 k
php-paragonie-random-compat noarch 1.4.1-1.el7 epel 24 k
php-password-compat noarch 1.0.4-1.el7 epel 10 k
php-process x86_64 5.4.16-36.3.el7_2 updates 55 k
php-seld-cli-prompt noarch 1.0.0-3.el7 epel 8.2 k
php-seld-phar-utils noarch 1.0.1-1.el7 epel 7.7 k
php-symfony-browser-kit noarch 2.8.12-2.el7 epel 23 k
php-symfony-class-loader noarch 2.8.12-2.el7 epel 26 k
php-symfony-common noarch 2.8.12-2.el7 epel 124 k
php-symfony-config noarch 2.8.12-2.el7 epel 51 k
php-symfony-console noarch 2.8.12-2.el7 epel 88 k
php-symfony-css-selector noarch 2.8.12-2.el7 epel 37 k
php-symfony-debug noarch 2.8.12-2.el7 epel 36 k
php-symfony-dependency-injection noarch 2.8.12-2.el7 epel 83 k
php-symfony-dom-crawler noarch 2.8.12-2.el7 epel 30 k
php-symfony-event-dispatcher noarch 2.8.12-2.el7 epel 24 k
php-symfony-expression-language noarch 2.8.12-2.el7 epel 27 k
php-symfony-filesystem noarch 2.8.12-2.el7 epel 22 k
php-symfony-finder noarch 2.8.12-2.el7 epel 38 k
php-symfony-http-foundation noarch 2.8.12-2.el7 epel 93 k
php-symfony-http-kernel noarch 2.8.12-2.el7 epel 99 k
php-symfony-polyfill noarch 1.2.0-1.el7 epel 22 k
php-symfony-process noarch 2.8.12-2.el7 epel 32 k
php-symfony-var-dumper noarch 2.8.12-2.el7 epel 48 k
php-symfony-yaml noarch 2.8.12-2.el7 epel 28 k
Transaction Summary
================================================================================
Install 1 Package (+34 Dependent packages)
Total download size: 8.9 M
Installed size: 31 M
Alernatively,
Download composer.phar and save as /usr/local/bin/composer then set as an executable.
As of Ampache 3.8.4dev, setup Remi Repository (rpms.remirepo.net) to meet PHP 5.6 requirements.
# yum install https://rpms.remirepo.net/enterprise/remi-release-7.rpm
# yum config-manager --enable remi-php56
# yum clean all
# yum update
$ sudo curl -o /usr/local/bin/composer https://getcomposer.org/composer.phar
% Total % Received % Xferd Average Speed Time Time Time Current
Dload Upload Total Spent Left Speed
100 1760k 100 1760k 0 0 212k 0 0:00:08 0:00:08 --:--:-- 369k
Set composer as executable.
$ sudo chmod +x /usr/local/bin/composer
Please note as of October 2018 and user wagnered shared the following:
If the Ampache release is installed, installation of Composer isn't necessary. Also .htaccess has already been created.Enable MariaDB
$ sudo systemctl enable mariadb
Created symlink from /etc/systemd/system/multi-user.target.wants/mariadb.service to /usr/lib/systemd/system/mariadb.service.
Start MariaDB
$ sudo systemctl start mariadb
$ sudo systemctl status mariadb
● mariadb.service - MariaDB database server
Loaded: loaded (/usr/lib/systemd/system/mariadb.service; enabled; vendor preset: disabled)
Active: active (running) since Sat 2016-12-03 12:43:35 PST; 8min ago
Main PID: 1558 (mysqld_safe)
CGroup: /system.slice/mariadb.service
├─1558 /bin/sh /usr/bin/mysqld_safe --basedir=/usr
└─1715 /usr/libexec/mysqld --basedir=/usr --datadir=/var/lib/mysql...
Dec 03 12:43:33 amp.intranet.harmonson.net mariadb-prepare-db-dir[1479]: You ...
Dec 03 12:43:33 amp.intranet.harmonson.net mariadb-prepare-db-dir[1479]: cd '...
Dec 03 12:43:33 amp.intranet.harmonson.net mariadb-prepare-db-dir[1479]: You ...
Dec 03 12:43:33 amp.intranet.harmonson.net mariadb-prepare-db-dir[1479]: cd '...
Dec 03 12:43:33 amp.intranet.harmonson.net mariadb-prepare-db-dir[1479]: Plea...
Dec 03 12:43:33 amp.intranet.harmonson.net mariadb-prepare-db-dir[1479]: The ...
Dec 03 12:43:33 amp.intranet.harmonson.net mariadb-prepare-db-dir[1479]: You ...
Dec 03 12:43:33 amp.intranet.harmonson.net mysqld_safe[1558]: 161203 12:43:33...
Dec 03 12:43:33 amp.intranet.harmonson.net mysqld_safe[1558]: 161203 12:43:33...
Dec 03 12:43:35 amp.intranet.harmonson.net systemd[1]: Started MariaDB databa...
Run the script below and, generally, accept the defaults.
$ sudo mysql_secure_installation
Increase your max upload, upload_max_filesize, size in /etc/php.ini to 20MB or more. The max post, post_max_size, must be more than the upload_max_filesize. These values can be adjusted to your preference but larger the files, e.g. video, the larger you will need to increase the value. Remember to sudo systemctl restart httpd after changing the values. The values 20M and 40M should be sufficient for lossless audio.
$ sudo vi /etc/php.ini
upload_max_filesize = 20M
post_max_size = 40M
Per Ampache's Github wiki, mod_rewrite needs to be enabled. For CentOS 7.2.1511 it is enabled by default as you can verify by reviewing conf.modules.d.
$ sudo cat /etc/httpd/conf.modules.d/00-base.conf | grep -i rewrite_module
LoadModule rewrite_module modules/mod_rewrite.so
In addition, permit Ampache to override Apache settings for the Ampache installation directory.
$ sudo vi /etc/httpd/conf/httpd.conf
..
<Directory "/var/www/html">
AllowOverride All
..
</Directory>
Enable Apache
$ sudo systemctl enable httpd
Created symlink from /etc/systemd/system/multi-user.target.wants/httpd.service to /usr/lib/systemd/system/httpd.service.
Start Apache
$ sudo systemctl start httpd
$ sudo systemctl status httpd
● httpd.service - The Apache HTTP Server
Loaded: loaded (/usr/lib/systemd/system/httpd.service; enabled; vendor preset: disabled)
Active: active (running) since Sat 2016-12-03 12:51:19 PST; 2s ago
Docs: man:httpd(8)
man:apachectl(8)
Main PID: 1872 (httpd)
Status: "Processing requests..."
CGroup: /system.slice/httpd.service
├─1872 /usr/sbin/httpd -DFOREGROUND
├─1876 /usr/sbin/httpd -DFOREGROUND
├─1877 /usr/sbin/httpd -DFOREGROUND
├─1878 /usr/sbin/httpd -DFOREGROUND
├─1879 /usr/sbin/httpd -DFOREGROUND
└─1880 /usr/sbin/httpd -DFOREGROUND
If using firewalld, skip to the section titled "firewalld."
Update iptables to permit HTTP/HTTPS traffic.
$ sudo iptables -I INPUT -p tcp -m conntrack --ctstate NEW -m tcp --dport 80 -j ACCEPT
$ sudo iptables -I INPUT -p tcp -m conntrack --ctstate NEW -m tcp --dport 443 -j ACCEPT
$ sudo service iptables save
Alternatively, you could copy and paste the script below and execute (chmod +x) as root.
#!/bin/bash
#Flush current policies
iptables -F
# Set default chain policies
iptables -P INPUT DROP
iptables -P FORWARD DROP
iptables -P OUTPUT ACCEPT
# Allow established sessions to receive traffic
iptables -A INPUT -m conntrack --ctstate ESTABLISHED,RELATED -j ACCEPT
# Accept on localhost
iptables -A INPUT -i lo -j ACCEPT
#ICMP Echo (OPTIONAL)
iptables -A INPUT -p icmp --icmp-type echo-request -j ACCEPT
iptables -A INPUT -j REJECT --reject-with icmp-host-prohibited
# Accept incoming SSH
iptables -I INPUT -p tcp -m conntrack --ctstate NEW -m tcp --dport 22 -j ACCEPT
# Accetp incoming HTTP/HTTPS
iptables -I INPUT -p tcp -m conntrack --ctstate NEW -m tcp --dport 80 -j ACCEPT
iptables -I INPUT -p tcp -m conntrack --ctstate NEW -m tcp --dport 443 -j ACCEPT
# Save Changes
service iptables save
# Service
systemctl restart iptables
systemctl status iptables
To permit HTTP/HTTPS traffic using firewalld.
$ sudo firewall-cmd --permanent --zone=public --add-service=http --add-service=https
$ sudo firewall-cmd --reload
Update selinux's configuration file from enforcing to permissive or disabled. If selinux is set for enforcing, ampache.cfg.php will not be writeable. Setting selinux to permissive will permit writing to ampache.cfg.php during initial setup via Ampache's portal.
$ sudo vi /etc/selinux/config
SELINUX=permissive
Updating the file will not update your current session. Use setenforce 0 to set permissive for your session.
After installation and testing of Ampache, update your SELinux configuration to prevent unauthorized changes to ampache.cfg.php.
Enter the web server root directory
$ cd /var/www/html
Clone ampache from github
# git clone https://github.com/ampache/ampache.git
Alternatively, you can specify a branch like the develop(ment) branch.
$ sudo git clone -b develop https://github.com/ampache/ampache.git
Results
Cloning into 'ampache'...
remote: Counting objects: 56678, done.
remote: Compressing objects: 100% (12/12), done.
remote: Total 56678 (delta 4), reused 0 (delta 0), pack-reused 56666
Receiving objects: 100% (56678/56678), 113.75 MiB | 2.68 MiB/s, done.
Resolving deltas: 100% (40157/40157), done.
Grant the web server privileges to the ampache directory.
$ sudo chown -R apache. ampache/
Enter the ampache installation directory and execute composer.
$ cd /var/www/html/ampache
$ sudo su -
# composer install --prefer-source --no-interaction
Results
Do not run Composer as root/super user! See https://getcomposer.org/root for details
Loading composer repositories with package information
Installing dependencies (including require-dev) from lock file
- Installing wikimedia/composer-merge-plugin (v1.3.0)
Cloning bfed1f8d4eb97e9ba80eee57ea46229d7e5364d9
- Installing afterster/php-echonest-api (dev-master master)
Cloning master
- Installing symfony/process (v2.8.3)
Cloning 7dedd5b60550f33dca16dd7e94ef8aca8b67bbfe
and a all whole bunch more so be patient..
Ampache is ready for configuration and testing. Open your browser and use the URL http://<IP-or-Hostname>/ampache and walk through the process to configure.
Note if Ampache is not installed at the Apache root directory, after completing the last configuration web page, the one for setup of the admin user, you may be redirected to "yourhost/login.php" and displayed a 404 error. You must update ampache.cfg.php to reflect Ampache installation location. For example using /var/www/html/ampache
$ sudo vi /var/www/html/ampache/config/ampache.cfg.php
web_path = "/ampache"
Ampache should be ready to configure and create your initial catalog. Select the little "Admin" server icon after logon to begin.
If you run into challenges, check your work!
[root@amp html]# mv ampache ampache383dev
[root@amp html]# git clone -b develop https://github.com/ampache/ampache.git
[root@amp html]# cp ampache.383dev/config/ampache.cfg.php ./ampache/config/
[root@amp html]# cp ampache.383dev/rest/.htaccess ./ampache/rest/
[root@amp html]# cp ampache.383dev/play/.htaccess ./ampache/play/
[root@amp html]# chown -R apache:apache ampache
[root@amp html]# composer install --prefer-source --no-interaction