P330 Center board - randomlettersandnumbers/DJI-Stuff GitHub Wiki
Table of Contents
Function
Variants
Parts
Programming
External interfaces
Service interfaces
Board view
Schematics
Function
The Center board delivers power to all components of the drone and acts as a hub for connecting all modules to Flight Controller. The Flight Controller module is mounted on the Center Board.
Variants
There are multiple versions of the board.
| Marking | Overview |
|---|---|
| P330CB-H3-2D V2 |
Parts
Version TODO components
| Marking | Amt. | Pkg. | Function | Specification |
|---|---|---|---|---|
| TODO | 1 |
Programming
| Chips | Firmware | Description |
|---|---|---|
| TODO |
External interfaces
Connectors on the board are:
| Marking | Overview |
|---|---|
| M1,M2,M3,M4 | 4-pin socket to ESC; JST GHR-xxV-S Series |
| FAN | 3-pin socket; JST GHR-xxV-S Series |
| CAN | 4-pin socket; JST GHR-xxV-S Series; fitting plug Molex Micro-Fit 3.0 43640 - 43645 |
| EXP | 6-pin socket; JST GHR-xxV-S Series |
| SMB | 2-pin socket; Molex PicoBlade 51021 |
| COMP | 5-pin socket; Molex PicoBlade 51021 |
| CAM | 6-pin socket; Molex PicoBlade 51021 |
| ZENMUSE | 8-pin socket; Molex PicoBlade 51021 |
| Mx-V,Mx-G | High current pads, for each arm |
| BAT-V,BAT-G | High current pads for battery connector |
| GPS | 4-pin pads; for soldering in GPS |
| TEMP | 2-pin pads |
| G,V,B | 3-pin pads |
| N,R,T,G | 4-pin pads |
Service interfaces
The following service pads exist on this board:
| Marking | Overview |
|---|---|
| TODO |
Board view
Top of a P330CB-H3-2D V2 board:
Bottom of the P330CB-H3-2D V2 board:
More photos of the board are available in RC-groups thread.
Schematics
Schematic is available in RC-groups thread.