GL658 Main board - randomlettersandnumbers/DJI-Stuff GitHub Wiki
Table of Contents
Function
Variants
Parts
Programming
External interfaces
Service interfaces
Board view
Schematics
Function
The GL658 radio transmitter contains all vital elements on one board. The board is responsible of reading state of control sticks and switches, doing proper ADC conversion, then transmitting the control signal. But it also receives the Lightbridge video signal and telemetry from the drone, transcodes it and provides USB interface for reading the data and reconfiguring the drone from a mobile device.
Variants
There are 3 variants of GL658 controller used in Inspire products. Very similar boards are also used in GL300 remote controllers.
| Marking | Overview |
|---|---|
| GL658A | First version. |
| GL658B | |
| GL658C |
Variants of the board itself:
| Marking | Overview |
|---|---|
| WM610_GRCP_MAIN_V3 | |
| WM610_GRCP_MAIN_V4 |
Parts
Version WM610_GRCP_MAIN_V* components
| Marking | Amt. | Pkg. | Function | Specification |
|---|---|---|---|---|
| Altera Cyclone IV EF4CGXF27AF G CAAAF1301A KOREA | 1 | SoC FPGA with integrated transceiver | ||
| NXP LPC1765 | 1 |
Programming
TODO
External interfaces
Connectors on the board are:
| Marking | Overview |
|---|---|
| TODO |
Service interfaces
The following service pads exist on this board:
| Marking | Overview |
|---|---|
| TODO |
Board view
Top of an unknown WM610_GRCP_MAIN_V? board from GL658a:
Bottom of the WM610_GRCP_MAIN_V? board from GL658a:
Top of an unknown WM610_GRCP_MAIN_V? board from GL658b:
Bottom of the WM610_GRCP_MAIN_V? board from GL658b:
Partial top of a WM610_GRCP_MAIN_V4 board (FPGA markings visible):
Schematics
No schematics available.