GL358 Main board - randomlettersandnumbers/DJI-Stuff GitHub Wiki
Table of Contents
Function
Variants
Parts
Programming
External interfaces
Service interfaces
Board view
Schematics
Function
The GL358 radio controller uses one board for all control signals flow and video processing. The board is responsible of reading state of control sticks and switches, doing proper ADC conversion, then preparing the control signal for transmission. It also receives the video signal and telemetry from the drone and transcodes it. Radio frequency components are separated on their own boards for reduced interference.
Variants
There are multiple versions of the board.
| Marking | Overview |
|---|---|
| P01129.05 |
Parts
Version P01129.05 components
| Marking | Amt. | Pkg. | Function | Specification |
|---|---|---|---|---|
| 510FH9U LMV61 4MT | ||||
| STM32F072CBU6 GH260 8U CHN 508 A7 | ||||
| SBV TI 4CF S3M | ||||
| PAP TI A8 Z60W | ||||
| 9016CS3 AD3R6M |
Programming
TODO
External interfaces
Connectors on the board are:
| Marking | Overview |
|---|---|
| TODO |
Service interfaces
The following service pads exist on this board:
| Marking | Overview |
|---|---|
| TODO |
Board view
Top of a P01129.05 board:
Bottom of the P01129.05 board:
Top of a second P01129.05 board:
Schematics
No schematics available.