adminvpn linux - raeker/ARC-Wiki-Test GitHub Wiki

Advanced Research Computing : AdminVPN - Linux

ARC All Staff VPN Setup Instructions - Linux

Note: If you do not want to use the Cisco AnyConnect VPN client, you can attempt to configure your own client with the settings for the ARC-TS Admin VPN. It is said, however, that using the AnyConnect client may result in a better experience (fewer unintended disconnections) than other clients.

If you do not already have the Cisco AnyConnect VPN client installed

  1. Download and install the UMVPN-4.9.01095.tar.gz installer.
  2. Download the VPN-remote-IT-ARCTS-Admin.xml file.
  3. Place the VPN-remote-IT-ARCTS-Admin.xml file in the following path on your computer: /opt/cisco/anyconnect/profile
  4. Run the client
  5. Select the profile VPN-remote-IT-ARCTS-Admin from the drop down menu
  6. Click Connect

If you do already have the Cisco AnyConnect VPN client installed

  1. Download the VPN-remote-IT-ARCTS-Admin.xml file.
  2. Place the VPN-remote-IT-ARCTS-Admin.xml file in the following path on your computer: /opt/cisco/anyconnect/profile
  3. Restart the Cisco AnyConnect client if it is already running
  4. Select the profile VPN-remote-IT-ARCTS-Admin from the drop down menu
  5. Click Connect

ITS Advanced Research Computing

⚠️ **GitHub.com Fallback** ⚠️