SCSI2SD V5 Hardware Compatibility - rabbitholecomputing/SCSI2SD-V5 GitHub Wiki

Computer systems

Generally, all variants of SCSI2SD V5 are compatible with ANY device that has a SCSI interface. If you do not see your device listed below, it does not mean a SCSI2SD won't work with it, it simply indicates that nobody has reported it as working.

Mac LC, LC II, LC III and LC-475
Mac II running System 6.0.8
Mac SE/30
Mac SE
Apple IIgs using Apple II High Speed SCSI controller card (firmware v3.3 and later)
Symbolics Lisp Machine XL1200, using 1280 byte sectors (firmware v3.4 and later)
PDP-11/73 running RSX11M+ V4.6
Microvax 3100 Model 80 running VMS 7.3 (firmware 4.0 and later)
Amiga 500+ with GVP A530
Commodore Amiga 500 KS 1.3 with Oktagon 508 SCSI-2 controller
Amiga 2000 (B2000 rev 6.4 ECS) with DKB RapidFire SCSI 1 card
Amiga 4000 equipped with CyberStorm PPC using 68pin adapter.
Atari TT030 System V
Atari TT running TOS 3.06 with HDDRIVER software version 9.06
Atari Mega ST 1; TOS 1.04; Protar ProFile 30 external hard drive enclosure (1GB size limitation)
Atari MEGA STE
    needs J3 TERMPWR jumper
    1GB limit (--blocks=2048000). The OS will fail to read the boot sector if the disk is >= 1GB.
Atari Falcon, TOS 4.02, HDDRIVER 9.06 driver
Sharp X68000
    SASI models supported. See gamesx.com for information on building a custom cable.
    needs J3 TERMPWR jumper
    Set to SCSI ID 3. ID0 will not work. 
Compaq XP-1000 Professional Workstation
    Alpha 21264 CPU, 667MHz, with a QLogic SCSI controller in a PCI slot 
SCSI-based Macintosh Powerbooks (2.5" SCSI2SD)
    Also reported to work on Thinkpad 860 running Win NT 4.0 PowerPC.
AT&T 3B2/600
Sun 2/120 Workstation (Unit Attention disabled)
Sun 4/50 workstation
Data General MV/2500DC running AOS/VS
    Vendor: MICROoP
    Product: 1578-15       UP
    Revision: DG02
    Device-type modifier: 0x4c
Applix 1616
IMS MM/1
NeXTcube + NeXTSTEP 3.3
NeXTStation
Modified geometry settings are required to avoid "cylinder group too large" errors while formatting.
	(To simulate Quantum Fireball 1050S)
    512 bytesPerSector
    139 sectorsPerTrack
    4 tracksPerCylinder
    4135 cylinder per volume
    1 spare sector per cylinder
    2051459 usable sectors on volume
Apollo 400/425s running DOMAIN/OS
Motorola System V/68 R3V7 and R3V8.
    Since the installation have information about limited number of drives(most of them with custom commands) it requires a pre-installed disk image to be dd-ed on it. Works with MVME167 and MVME177
Motorola System V/88 R40V4.0 through R40V4.4
    It requires to describe the disk into a configuration file. The process is described here - http://m88k.com/howto-001.html

Samplers

Roland JS-30 Sampler
Akai S1000, S3200, S3000XL, MPC 2000XL, DPS 12
    SCSI cable reversed on S3200
    There are compatibility problems with the Akai MPC3000. It works (slowly) with the alternate Vailixi OS with multi-sector transfers disabled. 
EMU Emulator E4X with EOS 3.00b and E6400 (classic) with Eos 4.01
EMU E6400 w/ EOS2.80f
EMU Emax2
Ensoniq ASR-X, ASR-10 (from v3.4, 2GB size limit)
    ASR-10 Requires TERMPWR jumper (applies to pre. 5.0 SCSI2SD boards only)
    ASR-X resets when writing to devices > 2Gb. 
Ensoniq EPS16+
Kurzweil K2000R
    See kurzweil.com for size limits which a dependant on the OS version. Older OS versions have a 1GB limit.
    SCSI cable reversed 
Casio FZ-20M
    Requires TERMPWR jumper. The manual shows the pin25 of the DB25 connector is "not connected".
    May require scsi2sd-config --apple flag 
Yamaha A5000, A3000, EX5, EX5R 
EMU ESI4000
Synclavier 9600.
    Disable Parity. Max size == 9GB.

Other

HP 16601A, 16700A logic analyzers
Fluke 9100 series 
Reftek RT-72A Seismic datalogger.
	http://www.iris.iris.edu/passcal/Reftek/72A-R-005-00.1.pdf
	http://www.iris.iris.edu/passcal/Manual/rtfm.s3a.13.html
Konami Simpson's Bowling arcade machine
	http://forums.arcade-museum.com/showthread.php?p=3027446