Pneumatic Problems - quasics/quasics-frc-sw-2015 GitHub Wiki

Symptoms: The symptoms of the problem include the code crashing immediately once you enable the code.

Root cause of problem: The CAN was set to the wrong port and needed updated for this season.

Solutions: Before messing around with the code, check to make sure the wiring is correct and the pneumatic jumper is set to "on" on the power distribution board. If the problem still exist, then you will need to access the webDashboard. You need the latest version of lab view installed on the machine. After installing lab view, you can download CTRE. Make sure the version you download is compatible with this season. Once downloaded and installed, open Internet Explorer and type "10.26.56.101". If everything is wired correctly, under