Hiking DDS238 2 - qtoggle/espqtoggle GitHub Wiki
Device
Description
DDS238-2 is a single-phase DIN rail smart power meter.
By default, it runs Tuya proprietary firmware.
Configuration
Provisioning configuration name: espqtoggle/hiking/dds238-2-wifi
Flash Parameters
- flash mode: DIO
- flash frequency: 40MHz
Pins
| Number | Function | Remarks |
|---|---|---|
| 1 | MCU RX | |
| 3 | MCU TX | |
| 14 | status LED | active low |
| 16 | push button | active low |
Ports
| Id | Type | Description | Range/Unit | Remarks |
|---|---|---|---|---|
relay |
boolean | relay | ||
active_power |
number | active power | W | |
reactive_power |
number | reactive power | VAR | |
apparent_power |
number | apparent power | VA | |
power_factor |
number | power factor | 0..100 % | |
energy |
number | energy | kWh | |
voltage |
number | voltage | V | |
current |
number | current | mA |
Installation
Follow the Tuya Convert OS procedure.
Next Steps
You can now power your device by connecting it to mains. Follow the initial setup instructions to connect the device to Wi-Fi and add it to your qToggle system.