Blitzwolf SS3 - qtoggle/espqtoggle GitHub Wiki
Device
Description
Blitzwolf SS3 is a smart touch lightswitch.
By default, it runs Tuya proprietary firmware.
The following models are available:
- 1 channel
- 2 channels
- 3 channels
Configuration
Provisioning configuration names:
espqtoggle/blitzwolf/ss3/1-channelespqtoggle/blitzwolf/ss3/2-channelespqtoggle/blitzwolf/ss3/3-channel
Flash Parameters
- flash mode: DIO
- flash frequency: 40MHz
Pins
| Number | Function | Remarks |
|---|---|---|
| 0 | status LED | active low |
| 3 | push button 2 | active low |
| 4 | relay 2 | active high |
| 5 | push button 3 | active low |
| 12 | push button 1 | active low |
| 13 | relay 1 | active high |
| 15 | relay 3 | active high |
Ports
| Id | Type | Description | Range/Unit | Remarks |
|---|---|---|---|---|
push_button1 |
boolean | on/off button 1, setup button | ||
push_button2 |
boolean | on/off button 2 | only models with 2 and 3 channels | |
push_button3 |
boolean | on/off button 3 | only models with 3 channels | |
relay1 |
boolean | relay 1 | ||
relay2 |
boolean | relay 2 | only models with 2 and 3 channels | |
relay3 |
boolean | relay 3 | only models with 3 channels | |
button_held |
button_held | button held status |
Installation
Follow the Tuya Convert OS procedure.
Next Steps
You can now power your device by connecting it to mains. Follow the initial setup instructions to connect the device to Wi-Fi and add it to your qToggle system.