Blitzwolf SHP9 - qtoggle/espqtoggle GitHub Wiki
Device
Description
Blitzwolf SHP9 is a smart power strip, featuring:
- three remotely controllable sockets
- two USB outputs
By default, it runs Tuya proprietary firmware.
Configuration
Provisioning configuration name: espqtoggle/blitzwolf/shp9.
Flash Parameters
- flash mode: DOUT
- flash frequency: 40MHz
Pins
| Number | Function | Remarks |
|---|---|---|
| 0 | status LED | active low |
| 5 | relay 3 | active high |
| 12 | relay 1 | active high |
| 13 | push button | active low |
| 14 | relay 2 | active high |
| 15 | USB relay | active high |
Ports
| Id | Type | Description | Range/Unit | Remarks |
|---|---|---|---|---|
push_button |
boolean | on/off button, setup button | ||
relay1 |
boolean | relay 1 | ||
relay2 |
boolean | relay 2 | ||
relay3 |
boolean | relay 3 | ||
usb_relay |
boolean | USB relay |
Installation
Follow the Tuya Convert OS procedure.
Next Steps
You can now power your device by connecting it to mains. Follow the initial setup instructions to connect the device to Wi-Fi and add it to your qToggle system.