Blitzwolf SHP8 - qtoggle/espqtoggle GitHub Wiki
Device
Description
Blitzwolf SHP8 is an in-wall smart outlet, featuring:
- one remotely controllable socket
- power metering
By default, it runs Tuya proprietary firmware.
Configuration
Provisioning configuration name: espqtoggle/blitzwolf/shp8.
Flash Parameters
- flash mode: DOUT
- flash frequency: 40MHz
Pins
| Number | Function | Remarks |
|---|---|---|
| 3 | push button | active low |
| 4 | BL0937 CF | |
| 5 | BL0937 CF1 | |
| 12 | BL0937 SEL | |
| 13 | status LED | active low |
| 14 | relay | active high |
Ports
| Id | Type | Description | Range/Unit | Remarks |
|---|---|---|---|---|
push_button |
boolean | on/off button, setup button | ||
relay |
boolean | relay | ||
active_power |
number | active power | W | needs calibration |
energy |
number | energy | Wh | needs calibration |
current |
number | current | A | needs calibration |
voltage |
number | voltage | V | needs calibration |
power_calib |
number | power & energy calibration factor | ||
voltage_calib |
number | voltage calibration factor | ||
current_calib |
number | current calibration factor | ||
apparent_power |
number | apparent power | VA | |
power_factor |
number | power factor | 0..100 % |
Installation
Follow the Tuya Convert OS procedure.
Next Steps
You can now power your device by connecting it to mains. Follow the initial setup instructions to connect the device to Wi-Fi and add it to your qToggle system.