Blitzwolf SHP7 - qtoggle/espqtoggle GitHub Wiki
Device
Description
Blitzwolf SHP7 is a smart plug, featuring:
- two remotely controllable sockets
- power metering
By default, it runs Tuya proprietary firmware.
Configuration
Provisioning configuration name: espqtoggle/blitzwolf/shp7.
Flash Parameters
- flash mode: DOUT
- flash frequency: 40MHz
Pins
| Number | Function | Remarks |
|---|---|---|
| 0 | push button 1 | active low |
| 1 | status LED | active low |
| 2 | on/off LED 2 | active low |
| 3 | BL0937 SEL | |
| 4 | BL0937 CF | |
| 5 | BL0937 CF1 | |
| 12 | push button 2 | |
| 13 | on/off LED 1 | active low |
| 14 | relay 2 | active high |
| 16 | relay 1 | active high |
Ports
| Id | Type | Description | Range/Unit | Remarks |
|---|---|---|---|---|
push_button1 |
boolean | on/off button 1, setup button | ||
push_button2 |
boolean | on/off button 2 | ||
led1 |
boolean | on/off LED 1 | ||
led2 |
boolean | on/off LED 2 | ||
relay1 |
boolean | relay 1 | ||
relay2 |
boolean | relay 2 | ||
active_power |
number | active power | W | needs calibration |
energy |
number | energy | Wh | needs calibration |
current |
number | current | A | needs calibration |
voltage |
number | voltage | V | needs calibration |
power_calib |
number | power & energy calibration factor | ||
voltage_calib |
number | voltage calibration factor | ||
current_calib |
number | current calibration factor | ||
apparent_power |
number | apparent power | VA | |
power_factor |
number | power factor | 0..100 % |
Installation
Follow the Tuya Convert OS procedure.
Next Steps
You can now power your device by connecting it to mains. Follow the initial setup instructions to connect the device to Wi-Fi and add it to your qToggle system.