Blitzwolf SHP6 - qtoggle/espqtoggle GitHub Wiki
Device
Description
Blitzwolf SHP6 is a smart plug, featuring:
- one remotely controllable socket
- power metering
By default, it runs Tuya proprietary firmware.
The following models are available:
- 2300W (10A)
- 3450W (15A)
Configuration
Provisioning configuration names:
Flash Parameters
- flash mode: DOUT
- flash frequency: 40MHz
Pins
| Number | Function | Remarks |
|---|---|---|
| 0 | on/off LED | active low |
| 2 | status LED | active low |
| 4 | BL0937 CF1 | only 10A model |
| 5 | BL0937 CF | |
| 12 | BL0937 SEL | |
| 13 | push button | active low |
| 14 | BL0937 CF1 | only 15A model |
| 15 | relay | active high |
Ports
| Id | Type | Description | Range/Unit | Remarks |
|---|---|---|---|---|
push_button |
boolean | on/off button, setup button | ||
led |
boolean | on/off LED | ||
relay |
boolean | relay | ||
active_power |
number | active power | W | needs calibration |
energy |
number | energy | Wh | needs calibration |
current |
number | current | A | needs calibration |
voltage |
number | voltage | V | needs calibration |
power_calib |
number | power & energy calibration factor | ||
voltage_calib |
number | voltage calibration factor | ||
current_calib |
number | current calibration factor | ||
apparent_power |
number | apparent power | VA | |
power_factor |
number | power factor | 0..100 % |
Flash Parameters
- flash mode: DOUT
- flash frequency: 40MHz
Installation
Follow the Tuya Convert OS procedure.
Next Steps
You can now power your device by connecting it to mains. Follow the initial setup instructions to connect the device to Wi-Fi and add it to your qToggle system.