Blitzwolf SHP10 - qtoggle/espqtoggle GitHub Wiki
Device
Description
Blitzwolf SHP10 is a smart plug, featuring:
- one remotely controllable socket
- power metering (only model POA6204582)
By default, it runs Tuya proprietary firmware.
Following models are available:
- POA6204581
- POA6204582 (with power metering)
Configuration
Provisioning configuration names:
Flash Parameters
- flash mode: DOUT
- flash frequency: 40MHz
Pins
| Number | Function | Remarks |
|---|---|---|
| 1 | BL0940 RX | only for POA6204582 model |
| 3 | BL0940 TX | only for POA6204582 model |
| 4 | status LED | active low |
| 5 | relay | active high |
| 13 | push button | active low |
Ports
| Id | Type | Description | Range/Unit | Remarks |
|---|---|---|---|---|
push_button |
boolean | on/off button, setup button | ||
relay |
boolean | relay | ||
active_power |
number | active power | W | only for POA6204582 model |
energy |
number | energy | Wh | only for POA6204582 model |
current |
number | current | A | only for POA6204582 model |
voltage |
number | voltage | V | only for POA6204582 model |
temperature |
number | temperature | °C | only for POA6204582 model |
apparent_power |
number | apparent power | VA | only for POA6204582 model |
power_factor |
number | power factor | 0..100 % | only for POA6204582 model |
Installation
Follow the Tuya Convert OS procedure.
Next Steps
You can now power your device by connecting it to mains. Follow the initial setup instructions to connect the device to Wi-Fi and add it to your qToggle system.