Disable Channel Using a Switch

This is a frequently requested feature for FlyPlus developers:

• Aux = VRx*SWy (Issue #64)
• Modify "Mix" so that a slave channels input can be held at zero (Issue #82)

It can be set up with standard FlySky firmware mixes, no special FlyPlus feature is required:

Setup

For example, let's assume that we want to configure enabling or disabling of VrA potentiometer by a switch SwA.

Firstly, set up VrA as Ch5, and SwA as Ch6:

Key → Aux Channels
   Channel 5: VrA
   Channel 6: SwA

Then use one of the mixes as follows:

Key → Mix → Mix 1
   Mix is    On
   Master    Ch6
   Slave     Ch5
   Pos. mix  100%
   Neg. mix  100%
   Offset    -50%