Advanced: settings - plan-d-io/P1-dongle GitHub Wiki

Previous: EnergieID

Advanced network settings

If required, you can set a static IP here.

Telegram settings

Select meter readings to be pushed over MQTT. This list is populated by the default settings in the P1 dongle firmware. Meter readings which are not present in the received P1 telegram will never be sent.

You can also enable the complete P1 meter telegram to be pushed over MQTT. Be sure your MQTT broker accepts large (>1kB) payloads.

Release channel

Subscribe to firmware updates from different release channels. Currently, two channels are supported:

• main: the default release channel for stable firmware updates
• develop: the release channel for the latest but potentially unstable firmware updates

Next: LED signals

Update TLS bundle

Tick this box if your dongle has been unable to contact secure remote hosts (MQTT, EnergieID, update repository) even after multiple manual reboots. This might be a sign the TLS certificate bundle, used to authenticate with secure TLS/HTTPS servers, is outdated or corrupt. The dongle will reboot in recovery mode, download a new TLS bundle, then reboot again back into normal operation.