Tools - phnxdrgn536/FLSun-v400 GitHub Wiki

This list of tools is only a minimum recomendation and is not in any means meant to be an absolute list. These are recomended to have on hand before atempting to use this guide to calibrate and tune your printer.

1. Basic tool set that came with the printer (This includes the set of allen keys, snips, small screw driver, brush, tube of grease, and zip ties)
2. Either 3D print a belt tension guage (after reaching a point where you can print) Or some form of guitar or piano tuner or frequency guage that you can pluck the belts and get them to vibrate at the same frequency.
3. Preciosin caliper for measuring dimensions on printed parts. I suggest a digital caliper that will measure in mm and has at least a 0.01mm accuracy.
4. Isopropyl alcohol
5. lint free cloth or paper towels