Fuzz testing - phires/go-guerrilla GitHub Wiki
go-guerrilla fuzz testing
We use fuzz testing to further improve the stability and security of the software, making usage of the go-fuzz package. The tests are all in the fuzz.go file if the tests branch.
Preparations
Branches
The fuzz test lives in the Test Branch
We use a separate, as not everyone needs to run the fuzz tests, and there's a lot specific files. The files of interest are fuzz.go & fuzz_test.go, plus the 'corpus' data in the /workdir
Please checkout the branch tests for this:
$ git checkout tests
$ git pull
We try to keep the branch up-to-date with the master branch.
go-fuzz
If you don’t have go-fuzz already installed, do that now.
$ go get github.com/dvyukov/go-fuzz/go-fuzz
$ go get github.com/dvyukov/go-fuzz/go-fuzz-build
Build the packages and you should get the go-fuzz as well as the go-fuzz-build tools.
(Assuming go get
will build these automatically and leave them in $GOPATH/bin
)
Corpus files
If you have pulled the recent tests branch you should now also have the workdir and within that the corpus folder. This contains some files that are used to initiate the fuzzing. You are very welcome to create further corpus files, the ones we use are the example smtp files of the go-fuzz package.
Generating your own corpus files
See fuzz_test.go - run the TestGenerateCorpus test by itself to generate the corpus files, or add additional files there. The reason why a program is used to generate the corpus was because we couldn't use the text editor to insert non-printable characters that we want. For example, SMTP likes to have CR + LF at the end. To run TestGenerateCorpus by itself:
go test -v github.com/phires/go-guerrilla -run ^TestGenerateCorpus$
The go-fuzz program will also generate its own corpus files during execution and leave them there so that it can resume the tests from where it left.
Putting it all together
After everything is prepared you can start. Build the package with go-fuzz:
$ go-fuzz-build github.com/phires/go-guerrilla
This will take a while and create a file named guerrilla-fuzz.zip Now the fuzzing process itself can be started:
$ go-fuzz -bin=guerrilla-fuzz.zip -workdir=workdir -procs=250
This will run for quite a while. Eventually you will get an output that contains crashers.
You can investigate on those crashes looking at the .output files in the workdir/crashers folder.
Fuzz Function details
So here is our initial Fuzz function below. The go-fuzz program tries to re-use the function without restarting, which means we can initialize the server once, and then use the client pool to re-use our clients to speed things up. So we setup using the init function function in fuzz.go.
When you run the go-fuzz program, it will print out some statistics every second. eg.
2017/02/05 02:30:16 slaves: 500, corpus: 336 (1m17s ago), crashers: 2, restarts: 1/1490, execs: 1761505 (12490/sec), cover: 1040, uptime: 2m21s
What you want is a Fuzz function that has a high 'cover' number, and a low restart rate. You can see that with 500 clients, it can execute 12490 times per second! See go-fuzz readme for more details about these statistics.
Our function doesn't use a real TCP connection, it uses a mock connection which consists of 2 pipes. We are the client end of the pipe. For each call to Fuzz() we borrow a client from the pool, which may be recycled after. Next, we read the greeting from the server. After the greeting, we use io.Copy to inject raw input from the fuzzer to the server. We wait a little for the server to process the input, if we see that the server buffered something, try to read something, but don't block.
// Fuzz passes the data to the mock connection
// Data is random input generated by go-fuzz, note that in most cases it is invalid.
// The function must return 1 if the fuzzer should increase priority of the given input during subsequent
// fuzzing (for example, the input is lexically correct and was parsed successfully); -1 if the input must
// not be added to corpus even if gives new coverage; and 0 otherwise
func Fuzz(data []byte) int {
var wg sync.WaitGroup
// grab a new mocked tcp connection, it consists of two pipes (io.Pipe)
conn := mocks.NewConn()
// Get a client from the pool
poolable, err := fuzzServer.clientPool.Borrow(conn.Server, 1, logOff)
if c, ok := poolable.(*client); !ok {
panic("cannot borrow from pool")
} else {
mockClient = c
}
defer func() {
conn.Close()
// wait for handleClient to exit
wg.Wait()
// return to the pool
fuzzServer.clientPool.Return(mockClient)
}()
wg.Add(1)
go func() {
fuzzServer.handleClient(mockClient)
wg.Done()
}()
b := make([]byte, 1024)
if n, err := conn.Client.Read(b); err != nil {
return 0
} else if isFuzzDebug {
fmt.Println("Read", n, string(b))
}
// Feed the connection with fuzz data (we are the _client_ end of the connection)
if _, err = io.Copy(conn.Client, bytes.NewReader(data)); err != nil {
return 0
}
// allow handleClient to process
time.Sleep(time.Millisecond + 10)
if mockClient.bufout.Buffered() == 0 {
// nothing to read - no complete commands sent?
return 0
}
if n, err := conn.Client.Read(b); err != nil {
return 0
} else if isFuzzDebug {
fmt.Println("Read", n, string(b))
}
return 1
}
Crash reports and fixing them
The crash reports are dumped in the workdir/crashes dir
This data becomes input for your automated test cases.
Crash report files contain the binary input, or quoted ASCII input (.quoted) that triggered the crash/timeout. They also contain the stack trace report (.output files).
The next step is to start a new branch from master, take the crash output and write a test for it.
See test/guerrilla_test.go for functions that start with TestFuzz... for example. Run the test to see if you get a crash / hang, then fix the test and submit a pull request.
Tip: In case of binary input, then perhaps it can be base64 encoded if you want to include with your test case. Eg, to encode a binary file:
$ cat workdir/crashers/21c56f89989d19c3bbbd81b288b2dae9e6dd2150 | base64 > encoded.data.txt