API & Using as a package - phires/go-guerrilla GitHub Wiki
The following examples start from the basics and progress to more advanced features.
To get started, import the guerrilla package to your project.
import (
"github.com/phires/go-guerrilla"
)
You may use go dep to get all the dependencies.
This will start a server with the default settings, listening on 127.0.0.1:2525
d := guerrilla.Daemon{}
err := d.Start()
if err == nil {
fmt.Println("Server Started!")
}
d.Start()
does not block after the server has been started, so make sure that you keep your program busy.
The defaults are:
- Server listening to 127.0.0.1:2525
- use your hostname to determine your which hosts to accept email for
- 100 maximum clients
- 10MB max message size
- log to Stderror,
- log level set to "
debug
" - timeout to 30 sec
- Backend configured with the following processors:
HeadersParser|Header|Debugger
where it will log the received emails.
Same as above, except here things get more interesting as we start configuring
import (
"github.com/phires/go-guerrilla"
"github.com/phires/go-guerrilla/log"
)
cfg := &guerrilla.AppConfig{LogFile: log.OutputOff.String()}
d := guerrilla.Daemon{Config: cfg}
err := d.Start()
if err != nil {
fmt.Println(err)
}
Here we've set the Daemon's Config
field with an instance of AppConfig
type with our own setting for the LogFile
field. We had to import github.com/phires/go-guerrilla/log
to get the log.OutputOff
. LogFile
could also be a string to a path, or set it with log.log.OutputStderr.String()
, or log.OutputStdout.String()
The default server listens to 127.0.0.1:2525
- what if want 127.0.0.1:2526
instead?
cfg := &guerrilla.AppConfig{LogFile: log.OutputStdout.String()}
sc := guerrilla.ServerConfig{
ListenInterface: "127.0.0.1:2526",
IsEnabled: true,
}
cfg.Servers = append(cfg.Servers, sc)
d := guerrilla.Daemon{Config: cfg}
err := d.Start()
if err != nil {
fmt.Printlnl("start error", err)
}
Notice here we've used the ServerConfig
struct to build our server configuration, and then it
was appended to AppConfig.Servers
field. Notice that we've initialized the ServerConfig
with two properties: ListenInterface
and IsEnabled
- these are the minimal fields for configuring
a new server. The server will use default values for all unspecified fields.
Here is the AppConfig
type
// AppConfig is the holder of the configuration of the app
type AppConfig struct {
// Servers can have one or more items.
/// Defaults to 1 server listening on 127.0.0.1:2525
Servers []ServerConfig `json:"servers"`
// AllowedHosts lists which hosts to accept email for. Defaults to os.Hostname
AllowedHosts []string `json:"allowed_hosts"`
// PidFile is the path for writing out the process id. No output if empty
PidFile string `json:"pid_file"`
// LogFile is where the logs go. Use path to file, or "stderr", "stdout"
// or "off". Default "stderr"
LogFile string `json:"log_file,omitempty"`
// LogLevel controls the lowest level we log.
// "info", "debug", "error", "panic". Default "info"
LogLevel string `json:"log_level,omitempty"`
// BackendConfig configures the email envelope processing backend
BackendConfig backends.BackendConfig `json:"backend_config"`
}
Notice that it has struct tags
- this maps each value to a JSON file, we'll show you how to read the
config from a file later. Notice that
Servers
is a slice, you can have as many servers as you like. Finally theBackendConfig
configures how your email transaction will be processed. All servers share the same backend.
Here is the Servers
struct:
type ServerConfig struct {
// IsEnabled set to true to start the server, false will ignore it
IsEnabled bool `json:"is_enabled"`
// Hostname will be used in the server's reply to HELO/EHLO. If TLS enabled
// make sure that the Hostname matches the cert. Defaults to os.Hostname()
Hostname string `json:"host_name"`
// MaxSize is the maximum size of an email that will be accepted for delivery.
// Defaults to 10 Mebibytes
MaxSize int64 `json:"max_size"`
// PrivateKeyFile path to cert private key in PEM format. Will be ignored if blank
PrivateKeyFile string `json:"private_key_file"`
// PublicKeyFile path to cert (public key) chain in PEM format.
// Will be ignored if blank
PublicKeyFile string `json:"public_key_file"`
// Timeout specifies the connection timeout in seconds. Defaults to 30
Timeout int `json:"timeout"`
// Listen interface specified in <ip>:<port> - defaults to 127.0.0.1:2525
ListenInterface string `json:"listen_interface"`
// StartTLSOn should we offer STARTTLS command. Cert must be valid.
// False by default
StartTLSOn bool `json:"start_tls_on,omitempty"`
// TLSAlwaysOn run this server as a pure TLS server, i.e. SMTPS
TLSAlwaysOn bool `json:"tls_always_on,omitempty"`
// MaxClients controls how many maxiumum clients we can handle at once.
// Defaults to 100
MaxClients int `json:"max_clients"`
// LogFile is where the logs go. Use path to file, or "stderr", "stdout" or "off".
// defaults to AppConfig.Log file setting
LogFile string `json:"log_file,omitempty"`
// private fields omitted for brevity
}
A 'backend' is something that implements guerrilla.Backend
interface.
You don't have to implement this interface yourself. By default, go-guerrilla will use backends.BackendGateway
- which we refer to as the Gateway backend. So in the above example, the configuration will be passed to the Gateway backend.
The Gateway is actually quite powerful. Think of it as middleware. It can be composed by chaining individual
components, which we refer to as Processors. In the above example, we chained
"HeadersParser|Header|Hasher|Debugger"
which means that we'll start processing with the HeadersParser
processor and finish with the Debugger. You'll need to refer to individual documentation for
each Processor to see what fields are available for configuration.
The default Gateway
has its own configuration too. It takes the following fields:
-
save_workers_size
- A number representing the number of workers to run at the same time -
save_process
- A string that configures what processors to use for saving email -
validate_process
- (optional) Similar tosave_process
, however it configures which processors to use for recipient validation. -
gw_save_timeout
- (optional, string) duration to wait before timing out, for save_process. Default 29 sec. eg "29s" -
gw_val_rcpt_timeout
- (optional, string) duration to wait before timing out, for validate_process. Default 5 sec, eg "5s"
The other options, log_received_mails
is part of the Debugger processor, and primary_mail_host
is from the Header processor.
Notice that we instantiated a new bcfg
variable and initialized with a literal, just like initializing a map.
The keys of the map correspond the jason struct stags, these struct tags are defined in individual Processor
components. (The above components are defined in the backend package, go file names prefixed with 'p_'.
See the Backends Documentation for more information.
Here we use backends.BackendConfig
to configure the default Gateway backend.
The Gateway backend is composed of multiple components, therefore it does not define any static configuration fields. Instead, it uses a map to configure the settings.
cfg := &guerrilla.AppConfig{LogFile: log.OutputStdout.String()}
sc := guerrilla.ServerConfig{
ListenInterface: "127.0.0.1:2526",
IsEnabled: true,
}
cfg.Servers = append(cfg.Servers, sc)
bcfg := backends.BackendConfig{
"save_workers_size": 3,
"save_process": "HeadersParser|Header|Hasher|Debugger",
"log_received_mails": true,
"primary_mail_host" : "example.com",
}
cfg.BackendConfig = bcfg
d := guerrilla.Daemon{Config: cfg}
err := d.Start()
if err != nil {
fmt.Println("start error", err)
}
Use the d.AddProcessor
function to register your processor with the daemon.
Processors allow you to extend the backend. See the Backends Documentation for more information.
Say you have a JSON configuration file like so:
{
"log_file" : "./tests/testlog",
"log_level" : "debug",
"pid_file" : "tests/go-guerrilla.pid",
"allowed_hosts": ["spam4.me","grr.la"],
"backend_config" :
{
"log_received_mails" : true,
"save_process": "HeadersParser|Header|Hasher|Debugger",
"save_workers_size": 3
},
"servers" : [
{
"is_enabled" : true,
"host_name":"mail.guerrillamail.com",
"max_size": 100017,
"private_key_file":"config_test.go",
"public_key_file":"config_test.go",
"timeout":160,
"listen_interface":"127.0.0.1:2526",
"start_tls_on":false,
"tls_always_on":false,
"max_clients": 2
}
]
}
Then you can load it in like this:
d := guerrilla.Daemon{}
_, err = d.LoadConfig("guerrillad.conf.json")
if err != nil {
fmt.Println("ReadConfig error", err)
}
err = d.Start()
if err != nil {
fmt.Println("server error", err)
}
// ..
There's also a sister Daemon.SetConfig
function which allows you to pass the AppConfig
directly, without unmarshalling from JSON.
Use d.ReloadConfigFile
to re-load the config file after the daemon has started
Almost every config can be hot-reloaded. This means changing things without re-starting the daemon, kind of like changing a tyre while the car is still moving! 🚗 🚗 🚗 It can change the TLS configuration, add/remove/start/stop servers, log output destinations & levels, pid file name, allowed-hosts, connection timeout, backend configuration. The only limitation right now is that the max-clients cannot be resized since our current pool implementation doesn't support it (yet).
d := guerrilla.Daemon{}
ac, err = d.LoadConfig("guerrillad.conf.json")
if err != nil {
fmt.Println("ReadConfig error", err)
}
err = d.Start()
if err != nil {
fmt.Println("server error", err)
}
// ... somewhere else
d.ReloadConfigFile("guerrillad.conf.json")
Use d.Log()
to log stuff.
It uses logrus under the hood. For example:
d := guerrilla.Daemon{}
l := d.Log().Info("Hello Sir! It's a fine day for a cup of tea.")
In the beginning, the log will go to stderr, but once you do d.Start(), the log will point to whatever is specified in the config.
To re-open all log files, use:
d.ReopenLogs() error
Why would you want to reopen log files? A common way to rotate logs is to rename the file, and then tell the daemon to close the file descriptor and open a new one. This way no log entries are lost when the file is rotated.
Here is how you can setup log rotation using logrotate(8)
In all examples above, we did not shutdown the daemon, assuming that your program will keep busy by doing something else. When it's time to close, we don't want to abruptly close and leave any transactions halfway, we want to do a graceful shutdown and finish off any emails, close files/connections and then quit. We do this by calling:
d.Shutdown()
This will block until everything has been shuttered. It may take a while if your server is busy.
The way it works is, all connections are given very low timeouts while new connections are not accepted.
If any clients are in the command
state, the server will respond to all client's commands with
421 Server is shutting down. Please try again later. Sayonara!
, then close.
If the client is in the DATA state, the transaction will not be interrupted and will try to
complete with a low timeout, then close. Once all connections close, the backend gets shuttered and then the Shutdown function returns. Should the daemon not close in 60 seconds, it will exist forcefully with os.Exit(1)
Finally, you can subscribe to any config change event if needed by using these:
// Subscribe for subscribing to config change events
func (d *Daemon) Subscribe(topic Event, fn interface{}) error
// for publishing config change events
func (d *Daemon) Publish(topic Event, args ...interface{})
// for unsubscribing from config change events
func (d *Daemon) Unsubscribe(topic Event, handler interface{})
For example:
pidEvHandler := func(c *AppConfig) {
d.Logger.Info("The pid file changed to:", c.PidFile)
}
d.Subscribe(EventConfigPidFile, pidEvHandler)
(Note that the c *AppConfig
should be treated as read only. For config changes,
use the LoadConfig
or SetConfig
API functions described above)
- See MailDiranasaurus - a project used to get an insight into using go-guerrilla as a package. The serve.go file demonstrates the useage of the
Daemon
struct - Lots of examples in api_test.go
- The main guerrillad program is actually using the API itself. See cmd/go-guerrilla/serve.go