realme C3/Narzo 10A

Requirement :

Since TWRP/PBRP is available but we cant install GSI using custom recovery due to dynamic partitions

• Unlock bootloader
• Make sure you use ADB Fastboot that support fastbootd (Like latest Google SDK Platform Tools in here)
• Download any Phh based GSI (A/B arm64 image)
• Download vbmeta and boot from here : https://t.me/RealmeC310a then type #boot and #vbmeta
• Make sure the boot.img that you downloaded is same with your current firmware version

Steps to install :

• Extract and copy all GSI Image, vbmeta, and boot to ADB Fastboot folder
• Boot to system and make sure USB Debugging is active on your device
• Open ADB Fastboot and type: adb reboot fastboot
• Wait till the device boot to recovery (Yes, recovery, not fastboot. Because realme UI using Dynamic Partition and realme UI supporting fastbootd on it's recovery.) If you doubt, you can check on Device Manager and check your device already detected as Bootloader Interface or not. If already detected as Bootloader Interface, you can go on.
• Then type : fastboot flash system gsiimagename.img
• If done, type : fastboot reboot bootloader
• After reboot to bootloader, type : fastboot flash --disable-verity --disable-verification vbmeta vbmeta.img && fastboot flash boot boot.img
• Final touch, type : fastboot -w or Stock recovery to format the data
• Then fastboot reboot to start booting to the system

Hardware support

Component	Comment
Back Camera	Working
Front facing Camera	Working
Speaker / Mic	Working
Bluetooth	Working
WiFi	Working
SIM / Mobile Data / Voice	Working
VoLTE	Working
Fingerprint Sensor	Not Working
Offline Charging	Working
Tethering	Working
Hotspot	Working
Auto-Brightness	Working (But have lower brightness issue)

---

Tested By: me and my tester - RMX2020 Firmware version RMX2020_11.A.61 - Date tested June 13, 2021.

Tested By: @rjaakash - RMX2027 Firmware version RMX2027_11.C.01 - Date tested June 13, 2021.

Template created by @zguithues and @hackintosh5