Xiaomi Redmi K30 Pro Poco F2 Pro - phhusson/treble_experimentations GitHub Wiki
[Redmi K30 Pro] - [lmi]
Although this device is A-only, you have to choose GSI for A/B devices because this device is "system-as-root".
Tested images
√AOSP 10.0 v216
√AOSP 10.0 v217
√AOSP 10.0 v220
√AOSP 11.0 v312
×AndyYan's LineageOS 17.1 20200511 (Doesn't Boot)
×Google GSI, Havoc, CrDroid, LineageOS (Credits Chaptsand from CoolApk, same w/ Xiaomi Mi 10 umi)
√Google GSI(Official Android 12)
Flashing instructions (Credits phhusson and Akito, make sure to have the latest platform-tools installed)
Reboot to bootloader:
adb reboot bootloader
Flash vbmeta with
fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
If using wzsx150's unofficial TWRP, flash stock recovery
fastboot flash recovery recovery.img
Reboot to fastbootd
fastboot reboot fastboot
Flash system with
fastboot flash system system.img
Wipe data
fastboot -w
Reboot phone
fastboot reboot
Hardware support (Referred from Redmi K20 Pro)
Component | Comment |
---|---|
Camera | √× (Cameras work, but front camera does not popup at all, please read note 1); Stock camera apk supports main and front camera |
Audio | √ Speaker and microphone is working, USB Type C DAC is working, 3.5mm audio jack is working. |
Bluetooth | √? Bluetooth Speaker works fine, In-call is untested. |
Display | √ |
WiFi / Hotspot | √ |
GPS | √ |
SIM / Mobile Data / Voice | √× Internet Data works, call works, expect messages to be NOT working. |
VoLTE | ? (Untested) |
LED | √? Working, unsure about the second LED [Need more testing]. |
Fingerprint | √× (Recognition a little slower maybe due to system setting; Unlocking from off/AOD state not supported, need press power button first, not working since 216+) |
NFC | √? (Support card info reading via NXP.TagInfo, need more tests like card writing / simulation) |
Offline Charging | × |
Additional Note
- Terminal command for manually controlling the front camera motor (may require
su
depending on the GSI):
Popup: xiaomi-motor popup 1
Retract: xiaomi-motor takeback 1
-
Disable "audio effects" in phh treble settings to make audio work normally
-
Use the alternative audio strategy in phh treble settings to prevent audio from stopping for a short time randomly.
This wiki page is referred from Xiaomi Redmi K20 Pro (raphael) page as this device have a lot of things in common with in.
Redmi K30 Pro Tested By: Akito Mizukito (RealAkito) @ Redmi K30 Pro V11.0.6.0.QJKEUXM / V11.0.16.0.QJKCNXM / 20.5.14 Beta
lulujyc @ 20.5.21 Beta, 12.0.1 Stable (12.0.1 is recommended as it's more stable)
lulujyc @ Android 11 Beta 1: Doesn't boot any GSI including Google's Android 11 sGSI.
EdChdX @ Redmi POCO F2 Pro
asrieldashie @ 2021.10.04 . With PixelExtended vendor
Origin Redmi K20 Pro Wiki is made by AndyYan (AndyCGYan)
Template created by @zguithues and @hackintosh5